Operation Manual

9
XIII.Poor rinsing results
The appliance remembers the last error. To cancel the error sign press START button for approx.
3 sec. (see Cancelling a programme).
If error occurs, the appliance will lock the door. To open the door follow the below indications:
l cancel the error sign and wait until the symbol stops ashing or
l switch off the appliance using the button and wait approx. 2 minutes.
Warning! Cancellation only removes the error signal but does not remedy its cause.
If the display shows an error signal larger than E 06 or the activities mentioned above proved un-
satisfactory:
-write down the displayed error code
-switch off the appliance
-pull out the mains plug
-call the service
Care label symbols
I. Washing
II. Dry cleaning
III. Spin dryer
IV. Ironing
boiling
temp. 95
0
C
normal
temp. 60
0
C
Do not
wasch!
delicate
manual
all solvents
Do not
clean!
normal
Do not
dry!
110
0
C 150
0
C 200
0
C
Select a programme taking into account the care la bels in di cations.
normal
temp. 40
0
C
all but TRI
Benzine only
low
high
Do not
iron!
lAdjust the dose of the washing agent to
the degree of soiling and water hardness
(see re com men da tions on the washing
agent packaging).
lSelect appropriate programme.