Operation Manual

6
III. Water supply
IV. Water outlet
max 100 cm
min. 50 cm
V. Power supply
Secure the drain hose so it does not move dur-
ing operation!
Do not insert the drain hose too dip into the
water pipe!
the inlet hose with seals is in the drum of
the washing machine
Connection of the supply hose with Aqua
Stop
Water pressure min. 0.1 MPa (1 bar), max 0.8
MPa (8 bar)
Feed the cold water to the washing machine
exclusively
Use new complete hoses
supplied together with the
equipment. Do not apply
the already used hoses.
lConnection of the washing machine to the mains (plug-in soc-
ket in the electrical installation) should be at a conspicuous and
accessible place!
lConnect the washing machine only to the correctly installed
and earthed socket
lDo not use an extension cord
lBroken power leads, may be replaced only by authorised se-
rvicemen
lType of the power lead – H 0 5 V V – F 3G 1.0/
lCatalogue number of the power lead: 8010551