Operation Manual

OPERATION
16
Turn on the appliance and set the time.
Whenyouplugintheappliancefortherst
time you need to select the language. The
display is off except the text messaging area.
The default language is English. "Select lan-
guage" is displayed on the left and language
selection option on the right. You can use
, sensorsand[OK]. Use and
sensor to select language. Touch OK sensor
to select your preferred language (The "Se-
lect language" message will be displayed in
your preferred language). Touch OK again to
begin setting the time. For details on how to
select language please refer to the settings
section.
When you plug in the appliance (or after a
power outage) you will need to set current
time.Currenttimeisashingonthedisplay.
You can use , sensorsand[OK].
Touch OK to initiate standby mode.
Important! In the event of a power outage
all automatic programmes, set temperatures
and kitchen timer are cleared. If you interrupt
the pyrolytic cleaning (or the door is locked
for any other reason), the oven will start the
cooling and door opening procedure before
you can set the time.
Standby mode
In this mode, the power consumption of the
appliance is limited to 800mW (except when
cooling down or using the light). Switch the
appliance to standby mode to reset all func-
tion settings, times, temperature, kitchen
timer and automatic programmes. All heating
elements are disconnected. The display is
dimmed except for the clock. You can use
, and child lock combination (touched
together, individually they are inactive). Dis-
play backlight brightness is reduced.
If meat probe is plugged in the oven cavity,
is displayed. The symbol goes out when you
unplug the meat probe.
If the temperature in the oven chamber ex-
ceeds 50°C, the oven chamber temperature
is displayed (to indicate the residual heat)
and the cooling fan operates. When the tem-
perature drops below 50°C, the cooling fan is
turned off and the oven chamber temperature
display goes out.
If the oven door is opened, the oven light
comes on. Oven light turns off when you close
the door or automatically after 10 minutes if
the door is still open.
The is displayed when Child Lock is on.
Touch and together to deactivate Child
Lock.
When you activate the appliance from the
standby mode you will hear an acoustic
signal[on].Whenyouturnofftheappliance
into standby mode you will hear an acoustic
signal[off].
If you touch inactive sensors in a standby
mode,therewillbenoconrmation[error].
During 22:00 – 06:00 in standby the display
backlight is reduced as set for night-time
mode.