Operation Manual

9
INSTALLATION
Installing the oven
● Thekitchenareashouldbedryandaired
and equipped with efcient ventillation.
Wheninstallingtheoven,easyaccessto
allcontrolelementsshouldbeensured.
● This is a Y–type design built–in oven,
whichmeansthatitsbackwallandone
side wall can be placed next to a high
piece of furniture or a wall. Coating or
veneerusedonttedfurnituremustbe
applied with a heat–resistant adhesive
(100°C).Thispreventssurfacedeforma-
tionordetachmentofthecoating.
● Hoodsshouldbe installedaccordingto
themanufacturer’sinstructions.
● Make an opening with the dimensions
giveninthediagramfortheoventobe
tted.
● Makesurethemainsplugisdisconnected
andthenconnecttheoventothemains
supply.
● Inserttheovencompletelyintotheopen-
ingwithoutallowingthefourscrewsinthe
placesshowninthediagramtofallout.