Operation Manual

19
Switching on the wider heating zone
Important!
Only switch on a heating zone by
turning the knob clockwise. Turning
the knob in the opposite direction can
cause damage to the switch.
OPERATION
With the settings 0  1  2  3 the knob
operates the internal heating zone and it is
possible to smoothly control the amount of
heat transferred to a pan. Turning the knob
temporarily to the position marked causes
theexternalheatingzonetobeswitchedon.
From that point, you can smoothly control the
amount of heat trasferred to a pan by both
heatingzones(internalandexternal)asthe
internal switch will switch both zones off only
after the knob is set to position 0.
Zone heating indicator
Ifthetemperatureofaheatingzoneexceeds
50°C this is signalled by an indicator which
lights up for that zone.
When the heating indicator lights up it warns
the person using the cooker against touching
a hot heating zone.
For about 5 to 10 minutes after a heating
zone is switched off it will still have residual
heatthatcanbeused,forexampletowarm
up or keep dishes warm without switching on
another heating zone.