Operation Manual

33
CLEANING AND MAINTENANCE
Door removal
In order to obtain easier access to the oven
chamber for cleaning, it is possible to remove
the door. To do this, tilt the safety catch part of
the hinge upwards. Close the door lightly, lift
andpullitouttowardsyou.Inordertotthe
door back on to the cooker, do the inverse.
When tting, ensure that the notch of the
hinge is correctly placed on the protrusion
ofthehingeholder.Afterthedooristtedto
the oven, the safety catch should be carefully
lowered down again. If the safety catch is not
set it may cause damage to the hinge when
closing the door.
Removal of the internal glass panel
Removing the inner panel
1. Use a cross-head screwdriver to turn the
sideclampboltsloose(g.A).
2. Push the clamps off with a at screw-
driver. Pull the upper door slat loose.
 (g.A,B).
3. Pull the inner glass panel from its seat
(in the lower section of the door) (g.
C).
4. Clean the panel with warm water with
some cleaning agent added.
Carry out the same in reverse order to
reassemble the inner glass panel. Its
smooth surface shall be pointed up-
wards.
A
B
C
Tilting the hinge safety catches