INSTRUCTIONS FOR MAINTENANCE AND USE AMICA WRONKI S.A. 64 - 510 WRONKI ul. Mickiewicza 52 www.amica.com.
Dear Customer You are now a user of a kitchen extractor hood of OSC 6468W, OSC 5468W, OSC 6458I , OSC 5458I type. This hood has been designed and manufactured specially with a view to satisfying your expectations and it will certainly constitute a fitting element of a modern kitchen. The modern structural solutions and the newest technologies used in production of this hood guarantee its high effectiveness and good appearance. Please read these instructions carefully before installing the hood.
V Installation III Components To install the hood perform the following operations: 1. mount the hood body [C], 2. connect the hood to power supply network. 1. Installation of the hood body a) trace a vertical line on the wall to indicate the center of the cooker plate, dismantle the grease filter, hold the hood body „A” to the wall with its indicated center point on the vertical line, with the distance between the holes and the cooker plate at least 710 mm (Fig. 2).
VI Operation and maintenance 1. Operational safety. All safety instructions included in chapter IV must be observed. Textile grease filters and carbon filters should be replaced and aluminium filter should be cleaned according to manufacturer’s instructions, or more frequently in periods of intensive use (more than 4 hours a day). If a gas cooker is used it is forbidden to leave uncovered flame. When removing pots from gas burners set the flame to its minimum level.