Ceramic plate with touch control Operating Manual P*4VQ2**** PB*4VQ2****
DEAR USERS, • • • • • • The Operating Manual has been compiled so that you may quickly yet thoroughly familiarise yourself with your new ceramic plate. Before using your ceramic plate for the first time, read this Operating Manual thoroughly and carefully. Familiarise yourself with your new appliance and its respective operating functions as they appear in the Manual.
Table of contents Page Description ................................................................................................................ 4 Important hints ........................................................................................................... 7 Technical data ...........................................................................................................8 Proper cookware ................................................................................................
Description of ceramic plate (P*4VQ239T) Hotplate (back left) 145 Double hotplate (back right) 180/120 Double hotplate (front left) 180/120 Hotplate (front right) 145 Touch panel (display-indication) 6a 3 2 2 6b 4 1 5 7 -4- 1. Main sensor 2. Hotplate selection sensors 3. Hotplate indicators 4. Minus sensor 5. Plus sensor 6a. Double hotplate (back right) sensor with LED diode 6b. Double hotplate (front left) sensor with LED diode 7. Lock sensor with LED diode.
Description of ceramic plate (PB*4VQ233F) Hotplate (back left) 145 Hotplate (back right) 180 Hotplate (front left) 180 Hotplate (front right) 145 Touch panel (display-indication) 2 5 7 3 2 4 1. Main sensor 2. Hotplate selection sensors 3. Hotplate indicators 1 4. Sensor - minus 5. Sensor - plus 7. Lock sensor with LED diode.
Description of ceramic plate PBF4VQ245FT Double hotplate (back left) 140x250 Hotplate (back right 180 Double hotplate (front left) 180/120 Hotplate (front right) 145 PG4VQ245FT Double hotplate (back left) 140x250 Hotplate (back right 180 Double hotplate (front left) 180/120 Hotplate (front right) 145 Touch panel (display-indication) 2 5 3 6b 2 7 6a 4 1 -6- 1. Main sensor 2. Hotplate selection sensors 3. Hotplate indicators 4. Sensor - minus 5. Sensor - plus 6a.
Important hints The manufacturer shall not be held liable for any damages incurred in consequence of improper usage of the appliance or its usage for purposes other that those specified in the Operating Manual. The ceramic plate purchased by you has been manufactured with the effective standards. When using the plate for industrial purposes, observe regulations effective for the industry. • Check that the plate has not incurred damage during transportation.
• • If sugar or dishes containing sugar are spilled onto your plate, clean them immediately – still hot, if possible – to avoid chemical reactions which may damage the plate. See “Cleaning”. The ceramic heating plate is resistant to thermal shock. It is neither hot nor coldsensitive, although pointed hits, for example a fall of a bottle with spices or other small hard object, may in unfavourable circumstances lead to cracks and splits appearing on your ceramic plate.
• • • Lids prevent the heat from escaping from the pot and thus shorten the cooking time and reduce the consumption of power. Always keep bottoms of your cooking pots dry, to avoid sediment depositing on your plate. When using special cookware, observe instructions provided by their manufacturers. Hotplate diameter d1 Pot diameter d2 12 cm ca. 14 cm 14,5 cm ca. 16 cm 18 cm d1 d2 ca.
Please remember: When switching the plate on and off or adjusting the heating power always touch only one sensor (with the exception of switching off a hotplate or pot recognition function). If you touch more than one sensor at the same time, the system will ignore the entered settings and, should you keep touching the sensors for a long time, a fault signal will be emitted. Do not place any objects on the marked sensors (as a fault mode may be trigged) and keep them clean all the time.
Setting up the heating power Set the required heating power after you’ve selected a hotplate with appropriate sensor (2). As long as digit “0“ is flashing on the indicator (3), you may set the required heating power with „+” (5) or „-” (4) sensors. If you do not wish to use the automatic power reduction system, start setting the heating power from „+” sensor (5). You may then increase the heating power with „+” sensor (5) or reduce it with „-” sensor (4).
Switching off one hotplate You may switch off one of the hotplates following the below instructions: I. Select the hotplate you wish to switch off with the appropriate hotplate selection sensor. 2. Touch sensors „+” (5) and „-”(4) at the same time or set to 0 with „-” sensor (4). 3. Letter „H” is displayed on the hotplate indicator, as an indication of residual temperature. Hotplate lock The lock prevents the hotplates from being switched on by untitled persons (children lock) and from improper use.
Heating power level 1 2 3 4 5 6 7 8 9 Limited time of operation Maximal time in hours For safety reasons, every single hotplate is provided with an automatic device limiting its time of operation. The maximal times of operation are specified in the near Table. A hotplate switches off automatically if the heating power has not been changed during the specified time. If you want to continue cooking, switch on the hotplate again at the required level of heating power.
Cleaning and routine maintenance Cleaning Clean the ceramic plate regularly after every use, when it is still warm, if possible. Do not allow the plate to get very dirty and take special care to remove the boiled over and burnt residuals of food. To observe the cleaning instructions we recommend the following: Never allow dishes containing sugar or acid get burnt to the ceramic plate. Aluminium foil and plastic containers can also damage the ceramic plate if not removed immediately after melting.
Maintenance You can prevent damages caused by sugar or sugar-containing dishes by cleaning the hotplates with „Cerafix” or „Collo profi” agents, always or only before cooking the sugar-containing dishes. The mentioned agents cover the ceramic hotplates with a silicone film, not only protecting but also making the surface even more “smooth”.
Fig. A 576 50 48 6 60 0 8 51 544 Fig.
Installation of ceramic plate P*4VQ2*** prepare the place (the opening) in the table top of the piece of furniture according to the assembly sketch, the minimum space to be provided free under the ceramic plate is 80 mm, connect the stove to the electric power supply network in compliance with the operating manual of the stove, screw on lightly the holders underneath the ceramic plate, clean the table top from the dust, put the ceramic plate into the opening and press it strongly to the table top,
Instructions for the fitter The plate is factory-set for three-phase alternating current power supply (400 V 3N ~50 Hz). It may be adapted for one-phase current power supply (230 V) by adequate bridging on the connection strip, in accordance with the below wiring diagram. The wiring diagram is also provided in the bottom part of the lower cover. The connection strip may be accessed once the lid on the lower cover is removed.
- 19 -
IOAA-138 (05.
