Technical data

10
Installation of PG4VQ242 plate
INSTALLATION
Fig. A
Fig. B
600
483
+1
50
555
40
40
(min)(min)
575
505
45
 prepare the place (the opening) in the table top of the piece of furniture according to
the assembly sketch,
 the minimum space to be provided free under the ceramic plate is 80 mm,
 connect the stove to the electric power supply network in compliance with the operat-
ing manual of the stove,
 screw on lightly the holders underneath the ceramic plate,
 clean the table top from the dust, put the ceramic plate into the opening and press it
strongly to the table top,
 place fastening holders (Fig. B) perpendicularly to the stove edge and screw them
home,
 fill the gap between the stove and the table top with a silicone material.
Worktop
Seal
Ceramic
Hob
ScrewBracket