Technical data

15
OPERATION
Automatic power reduction system
Every hotplate is provided with automatic power reduction system. If the system is activated,
the hotplate will be switched on at its full power for a time depending on the selected heating
power level and then the power will be switched to the set heating power level.
Setting up the heating power
To set the required heating power first you
have to select a hotplate with sensor (2). As
long as digit “0“ is flashing on the indicator
(3), you may set the required heating power
with „+” (5) or „-” (4) sensors.
If you do not wish to use the automatic power
reduction system, start setting the heating
power from „+” sensor (5). You may then
increase the heating power with „+” sensor
(5) or reduce it with „-” sensor (4).
If you wish to use the automatic power reduc
-
tion system, start setting the heating power
from „-” sensor (4). (See Automatic power
reduction system).
1
3
4,8
6,5
8,5
2,5
3,5
4,5
-
1
2
3
4
5
6
7
8
9
Quick cooking
time (min)
Heating power
level
The automatic power reduction system will be activated if you start setting the heating power
from „-” sensor (4). The hotplate indicator (3) displays the heating power level “9”. When you
touch “+” sensor (5), the hotplate indicator (3) will display a dot near “9” digit for about 10
seconds.
If, within 10 seconds, you start setting the heating power with „-” sensor (4), the automatic
power reduction system will be activated and “A” letter will be displayed, flashing by turns
with the heating power level selected for the respective hotplate.
You can now adjust the heating power following instructions given in the chapter: „Setting
up the heating power”
If you do not start setting the heating power within 10 seconds, the dot near
digit “9“ will disappear, letter “A“ will not be lighted and the automatic power
reduction system will stay inactive.
If you do not wish to use the automatic power reduction system, start setting
the heating power from „+” sensor (5).
You can now adjust the heating power following instructions specified in the chapter:
„Setting up the heating power”.