Technical data

16
OPERATION
Switching off the whole ceramic plate
The plate is in operation as long as at least one hotplate is switched on. You can switch off
the whole plate by touching the main sensor (1). The hotplate indicator (3) displays letter “H”,
indicating the residual temperature.
Switching off a hotplate
You can switch off one of the hotplates proceeding as follows:
1. Select the hotplate you wish to switch off with the hotplate selection sensor (2).
2. Touch sensors „+” (5) and „-” (4) at the same time or reduce the set point to “0”
using sensor „-” (4).
Letter “H” is displayed indicating the residual temperature.
Lock function
The lock function, activated by the key sensor (7), prevents the activated hotplate from
being accidentally switched off by children, pets etc.
If you lock the plate when all the hotplates are switched off, the plate will be protected from
unintentional activation and can be operated only when unlocked.
If the lock function (7) is active and hotplates are switched on you can switch
off the plate be keeping sensors (2) or (4) or (5) for about 5 seconds.
After power failure the lock is activated automatically.
Locking the plate
To lock the plate touch the key sensor (7) until the LED (7) is lighted. At the beginning of
touching a short signal is emitted.
Unlocking the plate
To unlock the plate touch the key sensor (7) until the LED (7) goes out. At the end of touching
a short signal is emitted.