Technical data

8
Installation of PBP4VQ242 plate
INSTALLATION
Fig. A
Fig. B
 prepare a place (an opening) in the table top according to dimensions specified on the
installation drawing (Fig. A)
 minimal clearance to be left between the bottom furniture enclosure and the rack is 80
mm
 connect the plate to the mains according to the attached wiring diagram
 match the section of the mains cable to the power of the plate (should be done by a qu-
alified electrician)
 unstick paper protecting the double-sided adhesive tape stuck on one side to the edge of
the plate
 remove dust from the top, insert the plate into the opening and press hard
 fill the gap between the top and glass with silicone (Fig. B)
1 - table top
2 - silicone
3 - double-sided adhesive tape
4 - ceramic plate
544
513
581
600
50
486
4321