Instruction manual

Changing a programme with resetting
If you would like to cancel a program while a washing program is resumed.
Switching the machine off
NOTE: After the buzzer sound which indicates the end of the program when the washing program
comes to an end (end indicator light is on), you can leave the door of your machine ajar in order to
hasten the drying.
Note: If the machine door opens during washing or the power is cut off, the machine will go on to the
program in case the door is shut or the power is back.
21
Note: If energy is cut or machine door is opened during drying process, program is terminated. Your machine
becomes ready for new program selection.
Note:When the door of the machine is opened in order to stop the washing program before
it is completed first open the door slightly in order to avoid water spillage.
Open the door of your machine.
Light of the last selected
program will turn on.
Keep the program selection button pressed
for 3 seconds. (End of program indicator
flashes and program light turns off)
Discharge process starts after closing the
door of the machine.The machine
discharges the water in it for about 30
seconds.When the program is
cancelled,your machine gives a buzzer
sound for “5 times “ and the “end of
program indicator” turns on.
When end of the program indicator
turns on , switch your machine off
by using the Power On/Off button.
Pull the plug out of the outlet.
Turn of the water tap.