Instruction manual

• Filters clogged.
• Filters incorr
ectly fitted.
• Water drain pump clogged.
If there are white looking stains on the dishes
• A very small amount of detergent is being used.
• Rinse aid dosage setting at a very low level.
• No special salt is being used despite the high degree of water hardness.
• Water softener system setting is at a very low level.
• Salt compartment cap not closed well.
If the dishes won't dry up
• A programme without a dry operation selected.
• Rinse aid dosage set too low
• Dishes unloaded too fast.
If there are rust stains on the dishes
• Stainless-steel quality of the dishes washed is insufficient.
• High rate of salt in the wash water.
• Salt compartment cap not closed well.
• Too much salt spilt into the sides and into the machine while filling it with salt.
• Unhealthy mains grounding.
Door is not opened / closed properly ;
• Not proper weight wooden part inserted on the door. ( Follow the weight given in the
Assembly manuel )
• The tensile of the door spring not adjusted properly. Adjust it according to the Assembly
manuel
Call an authorised service if the problem still persists after the controls or in case of any
malfunction not described above.
25