Specifications

6.Run the Engine

To prevent the exhaust toxication, be sure to run the engine at ventilated place.

To prevent personal injury, avoid hands, personal body and cloths from involving into

the output shaft, pulley and V pulley etc moving parts.

Check the moving parts and the surrounding parts after stop the engine. Be sure that

there is no tool or cloth inside the engine body.

The muffler is very hot during running or just after running, do not touch the muffler.

The air cleaner will suck the surrounding airflow during the running. To prevent the

injury, avoid hands, personal body and cloths approach this part.

Warm up the engine for 5 minutes.

If the engine is very hot, set the governor lever to the expected position.

Be sure to regulate the engine speed with the governor lever.

Do not screw off the adjusting bolt and the fuel adjusting bolts, otherwise the abnormal

speed and output will result.

If the engine continually exhaust black smoke dur-

ing running, which indicates that the engine is run-

ning with overload, do adjust the engine pulley and

the load pulley.

speed limiter

F.O. limiter

WARNING

CAUTION

NOTE