Portable Air Conditioner User Manual AP11000 Thank you for selecting this super quality air conditioner. Please be sure to read this manual carefully before using it.
CONTENTS CONTENTS…..................... ..................................... ...... ....................................... 2 IMPORTANT SAFETY INSTRUCTIONS….............................................. 3- 5 INSTALLATION…................................................................................................ 6 PART NAME…...................................................................................................7- 8 CONTROL PANEL...............................................................
IMPORTANT SAFETY INSTRUCTIONS PLEASE READ ALL INSTRUCTIONS BEFORE USING Your safety and the safety of others is very important. THIS APPLIANCE. BASIC SAFETY PRECAUTIONS WARNING To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following: •Do not attempt to repair or replace any part of your air conditioner unless it is specifically in this manual. All other services should be referred to a qualified technician.
creating a shock hazard. If water enters the unit, unplug it immediately and contact Customer Service. It can result in the risk of electric shock. •Use two or more people to lift and install the unit. Failure to do so can cause back injury or other injuries.
ELECTRICAL SAFETY WARNING Electrical Shock Hazard Failure to follow these instructions can result in death, fire, or electrical shock. •This unit must be properly grounded. •Do not, under any circumstances, cut or remove the ground prong. •If you do not have a properly grounded outlet, or if there is any doubt that the outlet is not properly grounded, a qualified electrician should check the outlet and circuit, and, if necessary, install a properly grounded outlet.
INSTALLATION Selection of installation location Keep the unit on a flat surface and dry place. Leave at least 50cm space all around the unit. Installation Fix the exhaust pipe into the adapter, and then fix the other side of the exhaust pipe into the air outlet vent of the unit. (anti-clockwise) Fix the adapter into the window slider kit, and then half open the window to meet the width of the window slider kit. The length of the window slider kit is adjustable.
Incorrect mounting The bend of the exhaust pipe is very important. Incorrect mounting can prevent the machine from working correctly. Take care to prevent any sharp bows or bends of the exhaust pipe. The exhaust air must flow freely。 WARNING The length of the exhaust pipe is specially designed according to the specification of this product. Do not replace or prolong it with your own private hose as this could cause mal-function. BE CAREFUL: Use the shortest possible length which is 1500mm.
10 Back 10. Exhaust air outlet vent 11 11. Power cord 12. Big filter 12 13. Small filter 14. Draining hole 13 14 Check all the accessories included in the package and please refer to the installation instructions for their usage.
CONTROL PANEL 1. button: press this button to turn on/off the unit. 2. MODE button: press this button to select Cooling, Automatic adjusting mode or Fan mode 3. SPEED button: press this button to select high, low fan speed 4. Timer: when stand-by time press this key to set automatic time on; when running time press this key to set automatic time off. 5.
REMOTE CONTROL 1. Power 7 6 2. Celsius and Fahrenheit exchange button 3. Fan button 5 8 4. Cool Mode Button 5. Auto mode button 4 9 6. Down button 10 7. Up button 11 3 2 8. High fan speed button 1 12 9. Low fan speed button 10. Max cool button 11. Sleep Mode 12.
OPERATION METHODS Cooling mode .Press Cool button to choose Cool mode, the Cool mode indicator will flash. ·Press UP or DOWN button to set room temperature between 62°F（17℃） to 88°F（30℃）. ·Press FAN SPEED button (or High/Low button) to select high, low fan speed. Fan mode ·Press Fan button to choose Fan mode, the Fan mode indicator will flash. ·Select the fan speed by press SPEED button or press High / Low button directly. ·The temperature can not be set.
WATER DRAINAGE This product has a self-evaporative system. The condensing water will be recycled to cool the condenser. This can not only improve cooling efficiency, but also save energy for you. · If the inside water is full, the display panel will display “P2”, and the compressor will stop running. ·Please turn the machine off and move the machine to the place where can drain water, and then unplug the water-draining hole. After drainage, you can power it on and the machine will run again.
End of season ·Please drain the water. ·Keep the unit running in Fan mode for two hours until the inside of the unit is dry. ·Turn off the unit and unplug it. ·Clean the air filter and after dry it thoroughly, reinstall it. ·Remove the exhaust pipes and keep them carefully. ·Wrap the unit with the plastic bag and keep it in a dry place. TROUBLE SHOOTING Before contacting professional service, check it first yourself referring to the followings: Problem Cause Solution The air conditioner does not function.
