Manual
www.amico.com 13
Installation Precautions
Tampering with gas specic connections shall be prohibited. Do not alter, remove or modify gas specic connections.
Keep all manifold parts, tools and work surfaces free of oil, grease and dirt. These and other ammable materials may
ignite when exposed to high pressure oxygen or nitrous oxide.
• Do not use chemicals, lubricants or sealants unless specied in these instructions
• Before connecting the Liquid tank / Dewar to the manifold, ensure the tank valve is free of dirt and debris
• After connecting the tank to manifold, open the tank valve S-L-O-W-L-Y to allow heat of compression to dissipate
• Do not use ame or “sni” tests for leaks
• Do not apply heat to any part of the manifold system
• Always ensure Liquid tanks / Dewar’s are secure and on level oor
• Do not repeatedly bend, sharply bend, or twist pigtails as damage to tubing may occur
• After the manifold wall bracket has been mounted, at least two people should lift and hang the manifold cabinet, one
should not do this alone
• Do not put the manifold into operation until veried by a qualied person as per NFPA 99 or other local standards