User guide

www.amico.com 11
CPU Mount
WARNING Ensure CPU is within weight and size rating of the CPU mount. If not, please contact Amico
Accessories at (1-877-264-2697)
WARNING The CPU mount can be mounted anywhere at any height on the rail. However, DO NOT mount
anywhere above a patient’s head.
WARNING Ensure rail is stable and properly installed before mounting FIT Station.
1. Determine a suitable location on the VRS for the CPU, making sure it isn’t above a patient’s head. Also ensure
your CPU mount is compatible with your CPU’s weight and size rating. If not, please contact Amico Accessories.
(1-877-264-2697)
2. Mount the CPU mount to the VRS (refer to mounting of AHM arm to the VRS channel for instructions on how to
install Mounting Adapter to the VRS. (Refer to Page 9 for installation)(Figure 1)
NOTE: Mounting Adapter for CPU mount has a knob instead of a screw, and there is no nut to be tightened on the
other side.
(Figure 1)
Thumb
knobs
Mounting
Adapter
VRS
CPU
Mount
CPU slides
into slot
SECTION 2: Installation on Rail Systems