Installation Instructions Mira LED Light System w w w . a m i c o .
Contents Symbols Used in This Manual Safety Instructions Variants Scope Of Delivery Installing Mira LED Ceiling Mounted Installing Mira LED Wall Mount Installing Mira LED Floorstand Installing Light Head Operation, Disinfecting, Cleaning and Sterilization Maintenance Setting Spring Force Disassembly Disposal Spare Parts Troubleshooting Technical Data This manual contains detailed information on the above, but responsibility for effective installation ultimately rests with skilled and qualified contractors.
Introduction Dear Installer, Congratulations on your purchase of the MIRA LED Minor Surgery Light! The installation manual gives instructions on how to install the MIRA LED Minor Surgery Light. For instructions on operation, maintenance and further description of the product please refer to the Operation and Maintenance manual. Please read these installation instructions very carefully and follow the safety instructions and requirements. www.amico.
ENG ENG ENG ENG Symbols Used in This Manual 1 SYMBOLS 1 SYMBOLS 1 SYMBOLS 1 SYMBOLS SYMBOLS SYMBOLS SYMBOLS SYMBOLS The warning symbol is used for all instructions that are important for safety. If warnings are ignored, users may be injured The warning symbol is for all instructions that are important for safety. If warnings are ignored, users may be injured or The warning symbol is used for all instructions that are for safety.
Safety Instructions Intended use The Mira LED treatment light is designed to provide local illumination of the body of a patient for diagnosis or examination. The light is not designed for use during surgery. It is designed for continuous operation. It must be possible to stop the examination or diagnosis without danger to the patient if the light fails during use. User profiles Medical staff All persons with medical training who work in the field for which they were trained.
Safety Instructions Specific fitting instructions Mira LED Ceiling Mount • Mounting material not included in delivery. • The ceiling mount may be fitted to ceiling only with a concrete strength of B25 (C20/25) or greater. • Contact with reinforcing elements of the solid slab ceiling must be avoided. In case of doubt, a licensed fitter should control the mounting on the respective surface.
ENG ENG ENG 3 VARIANTS Variants 3 VARIANTS 3 VARIANTS VARIANTS VARIANTS VARIANTS 3.1 triango 30 C 3.1 triango 30 C Ceiling Mount30 C 3.1 triango 3.2 triango 30 W 3.2 triango 30 W Wall 3.2 Mount triango 30 W Floorstand 3.3 triango 30 F 3.3 3.3 triango 30 F triango 30 F www.amico.
SCOPE OF DELIVERY; triango 30 C SCOPE OF DELIVERY; triango 30 C SCOPE OF DELIVERY; triango 30 C SCOPE OF DELIVERY; triango 30 C SCOPE OF DELIVERY; triango 30 C Scope of Delivery 4 4 4 4 4 SCOPE OF DELIVERY SCOPE SCOPE OF OF DELIVERY DELIVERY SCOPE OF DELIVERY SCOPE OF DELIVERY ENG ENG ENG ENG ENG 1x ring 1x ring 1x ring 1x ring 1x ring 4.1 triango 30 C 4.1 triango 30 C 4.1 triango 30 C 4.1 triango 30 C Included: 4.
ENG ENG ENG ENG SCOPE OF DELIVERY; triango 30 C SCOPE OF DELIVERY; triango 30 C SCOPE OF DELIVERY; triango 30 C SCOPE OF DELIVERY; triango 30 C Scope of Delivery 4 4 ENG 4 4 SCOPE SCOPE OF OF DELIVERY DELIVERY SCOPE SCOPE OF OF DELIVERY DELIVERY 1x ring 1x ring 1x ring 1x ring 4.1 triango 4.1 triango 30 30 C C 4.2 triango 30 W Included: 4.1 triango 30 C Included: 4.
SCOPE OF DELIVERY; triango 30 F SCOPE SCOPE OF OF DELIVERY; DELIVERY; triango triango 30 30 C F SCOPE OF DELIVERY; triango 30 F SCOPE OF DELIVERY; triango 30 F Scope of Delivery 4.3 triango 30 F DELIVERY 4 SCOPE OF 4.3 triango 30 F 4.3 30 F Included:triango 4.3 triango 30 F Included: ENG ENG ENG ENG ENG 1x spring arm 1x 1x ring spring arm 1x spring arm 1x spring arm Included: 4.
5 INSTALLING triango 30 C ENG 5 INSTALLING triango 30 C 5 ENG 5.1 INSTALLING Load data triango 30 C INSTALLING triango 30 C; Installing ceiling mount Load data 5.15.1 Load data 5 INSTALLING triango 30 C 5.1 Load data Bending moment B 200 Nm 5.1 Load dataM Bending moment 200 5Bending INSTALLING triango 30 C moment MBMB 200 NmNm Vertical weight forces FG 130 N 5.
CAUTION Installation: Mira LED Ceiling Mount INSTALLING triango 30 C; Installing ceiling mount INSTALLING triango 30 C; Installing ceiling mount Risk of injury from the falling luminaire. ENG The ceiling must be solid concrete to ENG ensure a secure mount. Tighten the nuts (observing the torque specified by the ceiling anchor Use Tighten appropriate anchors. thewallnuts (observing the torque manufacturer). specified by the ceiling anchor manufacturer).
Also tighten the screw 4 Allen Tighten M8 locking andscrews nut 1 in the mounting 2 Also tighten the 4 Allen screws in the Tighten M8 locking screw and nut 1 mounting 2 Also tighten the 4 Allen screws in the WARNING mounting 2 WARNING Danger of death from electric shock. WARNING Danger of death frombreaker electricbefore shock. Switch off circuit working on Installation: Mira LED Ceiling Mount the mains Danger of death frombreaker electricbefore shock. Switch off connection.
INSTALLING triango 30 W 6 Bending moment MB 6.1 6.1 6.1 Load data Vertical Loadweight data forces FG Load data 250 Nm 150 N Installation: Mira LED Wall Mount Bending moment MB Bending moment MB Vertical weight forces FG Bending moment MB Vertical forces FG 6.2weightInstalling Vertical weight forces FG wall 250 Nm 250 Nm 150 N 250 Nm 150 N mount 150 N Load data Insert tubular dowels for the chosen screws and fitttubular the walldowels mount.
ENG INSTALLING triango 30 W; Installing wall arm Installation: Mira LED Wall Mount ENG ENG ENG Connect the lamp cable. ENG ENG Connect the lamp cable. Connect the lamp cable. • Connect the lamp cable. Connect the lamp cable. INSTALLING triango 30 W; Installing wall arm INSTALLING triango 30 W; Installing wall arm CAUTION 1 Light may fall if inaccurately fastened. 2 1 must • Locking ring click into groove and be evenly First install washer the locking ring 2.
Installation: Mira LED Floorstand ENG ENG INSTALLING triango 30 F INSTALLING triango 30 F 7 INSTALLING triango 30 F INSTALLING triango 30 F triango 30 F 7 INSTALLING Tighten the screws of the power supply case with M3 Allen screw and lock washers. INSTALLING triango 30 F 7 7 INSTALLING triango 30 F INSTALLING triango 30 F Remove M330Allen INSTALLING triango F screws on the sides and remove theM3 power supply case.
CAUTION CAUTION Never unscrew the upper cable holder – danger of injury. Never unscrew the upper cable holder – danger of injury. When both cable holders are removed, the connector is then free and can fall causing When both cable holders are removed, the possible injury and/or damage to the cable connector is then free and can fall causing and equipment. possible injury and/or damage to the cable and equipment.
the friction from the light head. To continue with installing the light head see Sec. 8 Installation: Installing Light Head 8 INSTALLING light head Turn back sleeve and tighten screw. Tighten screw according to requirements of the friction from the light head. To continue with installing the light head see Sec. 8 8 INSTALLING light head Remove screw and protecting cap. • Remove screw and protecting cap. CAUTION CAUTION Damage can be caused by falling light head.
ENG ENGENG ENG OPERATION / DISINFECTING, CLEANING AND STERILISATION OPERATION / DISINFECTING, CLEANING ANDAND STERILISATION OPERATION / DISINFECTING, CLEANING STERILISATION OPERATION / DISINFECTING, CLEANING AND STERILISATION Operation, Disinfecting, Cleaning and Sterilization OPERATION 10 DISINFECTING, CLEANING 9 9 9 OPERATION OPERATION 9 OPERATION triango 30 F triango 30 F 30 F triango Operation triango 30 F WARNING WARNING WARNING DangerLED of death from electric shock.
Maintenance WARNING Danger of death from electric shock. • Before installation disconnect plug from mains and set switch to off position. • Check the connecting cable for damage at least once a year. NOTICE • All maintenance and repairs must be done by an electrician. MAINTENANCE;user Setting spring force • Fort he corresponding profile see Safety Instructions section in this manual. MAINTENANCE; Setting spring force 11.1 Setting spring force Setting Spring Force 11.
If both cablethe retainers areretainer. unscrewed, the Never unscrew top cable Handle (Art.- Nr. D51.040.000) connection will be loose and will fall, which If both cable retainers are unscrewed, the may cause injury and damage to the cables connection will be loose and will fall, which and lamp. ENG may cause injury and damage to the cables and lamp. Spare Parts 13 12.1 ENG SPARE PARTS Disposal Rotary knob (Art.- Nr. D51.050.000) 12.113 Disposal SPARE PARTS Rotary knob (Art.- Nr. D51.050.
Technical Data Electrical: Nominal voltage 100 - 240 V Frequency range 50 / 60 Hz Power consumption 60 VA Integrated electronic transformer 100 – 240 V / 48 V Illumination: Central illuminance at 1.0 m 55,000 Lux Light field diameter d10 at 1.
www.amico.
www.amico.com Amico Lighting Solutions | www.amico.com 85 Fulton Way, Richmond Hill Ontario, L4B 2N4, Canada Toll Free Tel: 1.877.264.2697 Toll Free Fax: 1.866.440.4986 Tel: 905.763.7778 Fax: 905.763.8587 Email: info@amico.com LT INSTALL INSTR.
