User's Manual

22 User Manual for the Wireless Pocket USB
Chapter 5 Configuration
5.1 Connect to an Access Point in Infrastructure Mode
1. Refer to Chapter 3 Quick Start to Join in an Open Wireless Network to proceed step 1 ~ 2.
2. Select an AP that is in Infrastructure Mode and click the Connect button.
3. You will need to input security key when the selected AP is adopting wireless security
algorithm such as WEP, WPA, etc.
4. If the security key matches, a Connected icon will appear.
5.2 Connect to an Ad Hoc Station
1. Refer to Chapter 3 Quick Start to Join in an Open Wireless Network to proceed step 1 ~ 2.
2. Select a station that is in Ad Hoc mode and click the Connect button.
3. You will need to input the security key when the selected station is adopting wireless
security algorithm such as WEP, WPA-PSK, etc.
4. If the security key matches, a Connected icon will appear.
5.3 Start a New Ad Hoc Wireless Network
1. Refer to 4.8 Profile to define a new profile.
2. Enter one SSID and select Ad Hoc mode.
3. You can use WEP security algorithm and to do so, you will need to define at least a set of
64/128bits security key.
4. Select this profile and click Connect. You can start a new Ad Hoc wireless network if at
least one station is connected with the Pocket USB.