User's Manual
5 User Manual for the Wireless Pocket USB
Chapter 1 Introduction
1.1 Preface
The miniature Wireless Pocket USB gives you ultimate mobility in your office or while you are
traveling. It frees you from traditional Ethernet wiring and helps you connect to an existing
wireless network for sharing your broadband cable or DSL Internet access. It is designed for PC
computers running Microsoft® Windows® 98SE, ME, 2000 and XP operating systems. It is USB
2.0 compliant and is backwards compatible with USB 1.1. Its auto-sensing capability allows high
packet transfer at up to 54 Mbps for maximum throughput or dynamic range shifting to lower
speeds due to distance or operating limitations in an environment with a lot of electromagnetic
interference. The Wireless Pocket USB complies to IEEE 802.11b/g standards and provides 54
Mbps WLAN connectivity. It can protect data integrity with enterprise-level security.
1.2 Key Features
• Operate at 2.4GHz unlicensed frequency with data transmission rate up to 54Mbps
• IEEE standards support: IEEE 802.11b, 802.11g
• Advanced security features including WEP 64-bit, 128-bit
• USB 2.0 interface compliant with USB 1.1
• Full-featured WLAN management software utility
• Compatible with Windows 98SE, ME, 2000 and XP
1.3 Kit Contents
• Wireless Pocket USB
• Set-up CD with User Manual & Software Utility
• Neckwear
• USB 2.0 cradle with 3.7 feet (1.1 meters) integrated cable (option)
1.4 System Requirements
A computer must be at least equipped with the following requirements:
• available USB 2.0 port or USB 1.1 port
• CD-ROM drive
• Microsoft® Windows® 98SE, ME, 2000 or XP operating system
• Pentium® II 450MHz or faster processor
• 64 Mbytes RAM
• 50 Mbytes free hard disk space
1.5 LED Definition
• Act : flash during data transmitting
• Link : lit when wireless connection established