User's Manual

User Manual v1.0.0
36
Access
Enable this function can let clients use two access types:
a. LAN+WAN: the client can access to the Internet and access in the
router’s GUI.
b. WAN: the client can only access to the Internet.
Active Client List
Display the properties of the client which is connecting successfully.
4.3.2 Wireless Access Control
Access Control allows user to block or allow wireless clients to access this router. Users
can select the access control mode, then add a new MAC address with a simple
comment and click on “Apply Change” to save the new addition. To delete a MAC
address, select its corresponding checkbox under the Select column and click on “Delete
Selected” button.
4.3.3 IP Filtering
When enabled, LAN clients are blocked / filtered from accessing the Internet based on
their IP addresses