Specifications

16
9.1.1 LNB type
In this item, press[Volume Up/ Volume
Down]key can switch among “Standard”, “User”
and “Universal” mode.
For Example: If you use the Dual LNB, then you
should select “User” option in “LNB Type” and
set the correct frequency in LNB Type, then you
can play the channel normally.
9.1.2 DiSEqC
DiSEqC: You can use[Volume Up/ Volume
Down]key to switch options. There are several
options for your selection:
 Disable: without DiSEqC.
 1/2, 2/2: two ports DiSEqC
 1/4, 2/4, 3/4, 4/4: 4 ports DiSEqC
 1/8, 2/8… 8/8: 8 ports DiSEqC
 1/16, 2/16….16/16: 16 ports DiSEqC
9.1.3 Positioner
Positioner: In “Positioner” item, you can press
[Volume Up/ Volume Down]key to switch
“None / DiSEqC 1.2 / USALS” functions.
9.1.4 22k
You can use[Volume Up/ Volume Down]key to
switch “ON / Off”. When this item is switched to
“ON”, receiver will receive TV and radio input
signal from 22K port. If the item is switched to
“Off”, the receiver will receive all signal from 0K
port.
! Notice
When you choose LNB type “Universal”, you
can not modify 22K.
9.1.5 0/12V
You can use[Volume Up/ Volume Down]key to
switch “0V / 12V”. When this item switches to
“12V”, receiver will receive TV and radio input
signal from 12V port. If the item switches to
“0V”, the receiver will receive all signals from 0V
9.1.6 Tonebusrt
In “Toneburst” item, you can press [Volume Up/
Volume Down]key to switch “Off/On” functions.
9.1.7 Polarity
In “Polarity” item, [Volume Up/ Volume
Down]key to switch “Auto / H / V” functions.