Specifications

21
 On Time: use number keys to input your
wakeup time. Once the time’s up, no
matter what the system is in standby
mode or in playing mode, the system will
automatically switch to the channel you
want and start to play.
 Duration: After you set a time for
“Duration” item, once the time’s up, the
system will automatically switch to
standby mode. If you want not work this
function, set the duration is 00:00.
 When you select “Message” (reminding
message) option in “Timer Service”, the
screen will display like below:
 Wakeup Message: press [Volume Up /
Volume Down] key to select reminding
message as Birthday, Anniversary and
General.
 Wakeup Date, you can use number key to
input your wakeup date.
 On Time: use number keys to input your
wakeup time. Once the time’s up, no matter
what the system is in standby mode or in
playing mode, the system will automatically
pop a reminding message.
 The message will always display on the
screen, you can press [Exit] key to close it.
 Press [Exit]key to exit the current menu.
10.5 Startup Channel
Press [OK] key to enter “Startup Channel”
menu, and you will see the screen like below:
 If the setting of “Boot on Channel” is
“On”, it means the following two items
can be work. If the setting is “Off”, it
means the “Boot on Channel” function
can’t work.
 In the “Mode” item, you can set the
“Startup Channel” as “TV channel”
mode or “Radio channel” mode.
 In “Startup Channel” menu, you can
press [OK] key to open the channel
list, and select the channel that you
want it to startup, press [OK] key again
to confirm.
10.6 Channel Play type
1 Press [OK] key to enter “Channel Play Type”
menu, and you can select the “playing
channels” as “Free”, “Scrambled” or “All”.