Specifications

22
2
For Example: If you select “Free”, in full
screen play, all scrambled channels will be
skipped when you change channels by use
[Channel up/Channel Down] key.
3 Press [Exit] to draw back from “Channel
Setup” menu.
10.7 OSD Setting
When you input to “OSD Setting” menu, you will
see a screen like below:
1 Subtitle Display: You can press [Volume
Up/Volume Down] key to select “On” or “Off”.
If the current channel has subtitle
information, it will be showed up while this
function is “On”. If this function is “Off”, there
won’t show up subtitle information even if the
current channel has subtitle information.
2 OSD Timeout: When you switch channels in
full screen, there will show up some
information about current channel on the
lower of the screen. And regarding to the
duration of these information show up on the
screen, you can press [Volume Up/Volume
Down] key to set the time. The range of the
duration is “1 second ~ 10seconds”.
3 OSD Position: control display position of the
info bar in full screen mode. You can choose
“bottom” or “top”.
4 OSD Transparency: Besides the setting of
“OSD Menu Style”, you also can set the
transparency of OSD. You can press
[Volume Up/Volume Down] key to select the
values. There are 5 levels of transparency,
10%, 20%, 30%, and 40% and “NO” (means
no transparency function).
5 Load OSD Setting Default: If you are not
satisfy with your setting, you can move
highlight to this item and press [OK] key to
reset parameters as default value.
6 Press [Exit] key to draw back from the “OSD
Setting” menu.
10.8 Parental Lock
You can set a password for anyone who wishes
to operate in the “Installation” menu. And you
can also set the password for the lock channels.
(How to set the lock channel please refer to
LOCK) Here will show you how to setting and
how to revising the password.
1 In “Parental Lock” function, press [OK] key,
there will pop an dialogue for you to input
the password. When you input the correct
password, you will see a screen like below:
2 Menu Lock determining that when user
wish to enter “Installation” menu, whether
have to input Password or not. If the
setting of “Menu Lock” is “Yes” which
means user have to key in password, set
“No” means unlock.
3 Channel Lock determining that when user
wish to play the lock channels, whether