User's Manual

Interfaces
Version 0.4
AMIMON Confidential 7
Chapter 3
Interfaces
3.1 Video Data Input and Conversions
Figure 3: Video Data Processing Path
Figure 3 shows the stages for processing video data through the AMN2110. The HSYNC and the VSYNC input
signals are mandatory. The DE input signal is optional and can be created with the DE generator using the
HSYNC and the VSYNC pulses.
The video input data is uncompressed digital video up to 3*10 bits in width.
Important: When connected to a 3*8 bits source, connect the appropriate LSBs to GND.
The video interface provides a direct connection to the outputs from an HDMI receiver or from an MPEG decoder.
The appropriate registers must be configured to describe which format of video to input into the AMN11310. Refer
to the appropriate programmer's reference guide for more details.
DATA Enable (DE) Generator
The AMN2110 includes logic to construct the DE signal from the incoming HSYNC, VSYNC and clock. Registers
are programmed to enable the DE signal to define the size of the active display region.