Installation Manual

Amimon Ltd. 26 Zarhin St. Raanana, Israel. Tel: [phone] www.amimon.com
2017 © All rights reserved to Amimon ltd. Proprietary and Confidential
Confidentiality is requested
(4) Board-to-Board Connector
The Interface connector provides various interfaces to communicate between the module
and the MCU to configure video related parameters and settings, or receive the network
status and communication related parameters.
The following interface options are available:
- External Power Supply voltage (5VDC ±10%)
- Signal Ground
- Video signal
- I2S audio interface
- I2C bus
- Indication output (Power, Network, Video Indications)
- Board attached ID pins
- UART
- USB
- SPI
Contact Amimon to request the complete pin allocation and functional description of the
interface board.