Installation Manual

Amimon Ltd. 26 Zarhin St. Raanana, Israel. Tel: [phone] www.amimon.com
2017 © All rights reserved to Amimon ltd. Proprietary and Confidential
Confidentiality is requested
See ‘Product Description’ for port location described in this section.
1. Connect AMIMON modules to the compatible Video Interface Board (VIB).
2. Connect the antennas to the modules. Only use antennas provided by
AMIMON
3. Connect the receiver VIB to a video monitor through the supported video
interface of the VIB.
4. Connect the transmitter VIB to a video source (for example, camera) through
the supported video interface of the VIB.
5. Power ON the VIB according to its operating
manual.
6. Set the Antenna orientation of the receiver module
to perform optimal performance:
One option is to separate the antennas to match the
picture. Receiving antennas should be oriented in the same plane as the
transmitting antenna.
7. If the devices are not paired to each other, press the "pairing" button on each
module.
Note: For maximal range
 Keep line of sight between the transmitter and the receiver.
 Avoid placing any obstacles besides the transmitter or the receiver.
 Position both transmitter and receiver in an upwards position, for enhanced
antennas performance.
 Mount the modules with proper air ventilation.
 Use only approved accessories recommended by Amimon
 Avoid Co-location: Place the modules and their antennas as far away as
possible from other transceiver devices, 20cm separation is a minimal
distance unless otherwise specified in the Grant.
 Avoid Proximity to Metal Objects: The antennas must be at least 7 cm away
from any metal object.