Installation Manual
Amimon Ltd. 26 Zarhin St. Raanana, Israel. Tel: +972-9-9629222 www.amimon.com
2017 © All rights reserved to Amimon ltd. Proprietary and Confidential
Confidentiality is requested
Introduction
The AMN41012 and AMN42012 are wireless video system comprising of a video transmitter
and video receiver modules, that operate at the 5GHz unlicensed band.
It is are based on AMIMON's Professional chipset that consist of the AMN2130 and AMN2230
baseband receiver and the MAXIM 2850 and 2851 ICs, providing the ultimate solution for 4K
Video transmission. The perfect video, audio quality, the high robustness and the invisible
latency of the wireless system are unmatched by any other wireless technology and presents
a true alternative to cable. The system transmits uncompressed video and audio streams
wirelessly and thus simplifies and eliminates system issues, such as: lip-sync, large buffers
and other burdens like retransmissions or error propagation.
System Technical Specifications:
Table 1: AMN41012 - Technical Specifications
AMN41012
Frequency
Control:
Non-DFS Frequencies :
5.150~ 5.250 GHz for EU
5.150 ~ 5.250 GHz and 5.725~5.825 GHz for US
DFS Frequencies (used only in Aerial mode):
5.250-5.350 GHz and 5.470 ~ 5.725 GHz for EU
5.250-5.330 GHz and 5.470 ~ 5.725 GHz for US
5.250-5.350 GHz and 5.470 ~ 5.6GHz and 5.650 ~ 5.710 GHz for Canada
SRD Frequencies (EU):
5.725 ~ 5.875 GHz for EU
Antenna:
Total connectors: 2 or 4
2 or 4 transmitting ports of which 2 ports also act as receiving ports using diversity
through a single receive chain
External using on-board UFL Connectors: 2dBi or 5dBi omni Antenna gain
Environment:
Operational: -20 ÷ 50°C, 10 ÷ 90% humidity
Storage: -20 ÷ 55° C, 10% ÷ 90% humidity
Voltage:
5V
DC
±10%
Size:
L: 70.0mm x W: 56.1mm x H: 7.5mm
User Control:
3 LEDs indicating Power, Video lock and Network lock
3 buttons for pairing, reset, boot;
FCC ID
IC
VQSAMN41012
7680A- AMN41012