Product Information

 WARNING – do not touch. Please beware of hot surfaces of the devices and wait
until it cools off.
 Please avoid electrostatic discharge from the antenna ports for proper operation
 Keep these instructions in a safe and accessible place for future use.
 Declared maximum operating temperature: +TBD°C
Notice for OEM to include in their user documentation:
This module in its final integration requires the end-product to continue to comply with
DFS requirements.
A class II permissive change may be required for operation not already described in the
FCC Grant filing.
Basic compliance information statement
For products using SDoC, a compliance information statement shall be supplied with the
product at the time of marketing or importation, containing the following information:
a) Identification of the product, e.g., name and model number;
b) A statement that the product complies with the rules; and
c) The identification, by name, address, and telephone number, or internet contact
information, of the responsible party as defined in Section 2.909. The responsible party
must be located within the United States.
Compliance information statement for end products assembled from separately
authorized components /modules the following applies:
(1) assembled from components (e.g., enclosures, power supplies, and CPU boards)
that, by themselves, are authorized under SDoC or a grant of certification or both; and
(2) where the assembled product is also subject to authorization under SDoC but, in
accordance with the applicable regulations, does not require additional testing. Such
products shall be supplied, at the time of importation or marketing, with a compliance
information statement containing the following information.
a) Identification of the end product, e.g., name and model number.
b) Identification of the authorized components/modules used in the assembly. A
component authorized under SDoC shall be identified by name and model. A
component authorized under a grant of certification shall be identified by name and
model number (if applicable) along with the FCC Identifier number.
c) A statement that the product complies with the rules.