Installation Manual
Amimon Ltd. 26 Zarhin St. Raanana, Israel. Tel: +972-9-9629222 www.amimon.com
2017 © All rights reserved to Amimon ltd. Proprietary and Confidential
Confidentiality is requested
Installation
The modules are designed to be integrated with any compatible Video Interface
Board (VIB), to provide a complete wireless Video Solution.
At common application, the VIB shall provide standard video interface that can be
connected to standard video monitor. This video interface may be HDMI, HD-SDI or
any other standard or custom video interface.
It is advised to verify compatibility of the VIB to the interface connector type, pin
functionality, and signal compatibility of the modules, before initiating the
installation.
At installation, make sure that the modules are firmly attached and secured to the
VIB by proper mechanical means.
Installation of the modules must provide the adequate heat dissipation means to
provide the modules ambient temperature within the product operating conditions as
specified.










