Product Information

d) The identification, by name, address, and telephone number, or internet contact
information, of the responsible party who assembled the product from modular
components. The responsible party for an SDoC must be located within the United
States.
e) Copies of the compliance information statements for each authorized component
used in the system that is authorized under SDoC.
OEM Labeling Requirements
Notice: The OEM of final integrator must ensure that FCC and IC labeling requirements
are met.
For a host using this module, if (1) the module’s FCC ID and IC are not visible when
installed in the host, or (2) if the host is marketed so that end users do not have
straightforward commonly used methods for access to remove the module so that the
FCC ID and/or IC of the module are visible; then an additional permanent label referring
to the enclosed module should be used, with the following contents: Contains FCC ID:
VQSAMN4x012 IC: 7680A-AMN4x012 (where x denotes 1= Video transmitter, 2= video
receiver)
The host OEM user manual must also contain clear instructions on how end users can
find and/or access the module and the FCC ID and IC.