User's Manual

In order to modify the source name, follow the instructions below:
1. In order to modify the transmitter name press the “MENU” button to open the OSD
menu.
2. Choose the “Modify Video Source Name” option using the up and down arrows.
3. Press the “OK” button.
4. A list of all the registered transmitters will pop up.
5. Choose the source to rename using the “Up” and “Down” arrow buttons.
6. Press “OK” to select the source.
7. Choose the characters you wish to modify using the right and left buttons on the remote
control, and modify the name using the up, down and “OK” buttons.
8. Press “OK” to save the modified name.
Note: the transmitter name is modified on the receiver, so if the transmitter is registered to another
receiver, the original name of the transmitter will not change on that receiver.