Use and Care Guide

Wood is a natural, strong and durable material. Solid wood has distinct markings, such as veins, knots, and
color variations between planks, which distinguishes it from synthetic products.
Wood is a material that continues to live in your environment and will adjust to the conditions of your home.
Seasonal humidity and temperature changes can aect the appearance and size of your product, which should
be considered as normal.
To prevent damage to your wood product and to ensure your comfort, it is important to maintain a relative
humidity bethumidity between 30% and 50% in your home.
Please avoid placing the table or its extensions near a source of intense heat. To preserve your product original
color, please avoid placing it in direct sunlight.
Wood Characteristics and
Environmental Factors
Avoid applying:
Commercial cleaning solutions
Harsh cleaners
Glass cleaners
Waxes
Oils
Remove dust with a dry cloth,. To clean, use a soft clothand water. Your Amisco wood product has a durable
lacquer nish. Therefore, it doesnt need any punctual treatment.
Lacquer must be preserved by:
Wiping dry liquids spilled on the table
Cleaning zones that have been in contact
with food
Using tablecloth or fabric place mats
Using a trivet to put down a hot plate
Using a desk pad for writing
Avoiding to slide rough or heavy objects on
the table
Dust can be removed with a dry cloth.
Cleaning must be done using a soft cloth and
warm soapy water. Make sure to wipe dry
the table.
WOOD AND VENEER
Use a soft cloth and warm, mild soapy water, or all
purpose cleaner. Rinse and wipe dry. For stubborn
stains, use baking soda.
LAMINATE (TFL and HPL)
Use a soft cloth and mild soapy water. Rinse and
wipe dry. Do not use a scouring pad or an abrasive
cleanser. This could scratch the paint nish.
PAINTED STEEL
Use a soft cloth and mild soapy water, or all purpose
cleaner. Do not use solvant. Some foods may stain white
and light-colored PVC or polyurethane upholstery
coverings. Clean any food spills immediately to prevent
permanent stains. Blue-jean dye can transfer from jeans
onto white and light-colored PVC or polyurethane with
ccontact, even after several washings of the jeans. Clean
blue jean dye marks with isopropyl rubbing alcohol.
PVC AND POLYURETHANE UPHOLSTERY COVERINGS
Professionnal cleaning service is recommended.
Vacuum or brush regularly to remove dust and
grime. Some fabrics may require brushing with a
non metallic, sti bristle brush to restore appearance.
After a spill, blot immediately the spilled liquid. Clean
spot or stain from the outside to the middle of the
aarea aected to prevent circling. To remove soil,
clean the fabric with the foam from a mild water
based detergent. Test on a small inconspicuous area
before proceeding. Do not use household solvents,
hot water extraction or steam cleaning. Blue-jean
dye can transfer from jeans onto white or
light-colored upholstery fabrics with contact, even
afafter several washings of the jeans.
FABRICS
Cleaning Method

Summary of content (1 pages)