Spec Sheet

The LDX10 is the next generation of handheld computers from AML.
Like all AML products, the LDX10 is engineered, manufactured, and
serviced in the U.S.A. It is specifically designed for light-duty
commercial applications where
acquisition cost is a driving factor when
selecting a data collection device.
BenefitsFeatures
Lower Investment Cost
2.8” LCD with MVA Technology
Battery Life
AML ScreenFlash Technology
Protective Case
Pre-Loaded Software Apps
The LDX10 does not require an external cradle for charging or data communications, thus
reducing the user’s investment cost, as well as the complexity of the installation. It can be
charged using the supplied USB cable when plugged into a compatible wall charger, or into the
USB port of any computer that supplies the USB standard +5VDC at 500 mA.
Standard TFT displays are polarized in such a way that they are only viewable from a limited
angle. MVA (Multiple Viewable Angle) technology, like that used in the LDX10, allows a
completely undistorted view of the display no matter how the unit is being held.
The LDX10 is equipped with a battery configuration that provides for 3,200 mAh of capacity, or
4,000 scans....the largest capacity battery configuration of any comparable device on the
market. Once again AML recognizes the importance of being able to use the device
uninterrupted for hours on end.
AML’s proprietary ScreenFlash technology flashes the entire screen red or green for any number of
user alerts such as good or bad barcode reads or application warnings. This feature alerts the user
even if they are only viewing the screen through their peripheral vision and is especially helpful in
noisy environments where the device beeper may be drowned out by surrounding noise.
The protective silicone case seals the LDX10 to an IP54 environmental rating and protects it from
drops. Although the LDX10 is intended for light-duty commercial applications, it can withstand
the rigors of harsher environments.
Every LDX10 comes with DC Suite which includes seven software applications to accommodate
the most common barcode data collection tasks, making it ready to go to work right out of the
box.
Batch Data Collection Handheld
LDX10
The LDX10 comes not only with an affordable price tag, but a
collection of pre-loaded software applications
called DC Suite which are designed specifically
for common, everyday barcode data
collection tasks.
Most users will be able to simply charge the
battery, select the DC Suite application that fits their needs, and go
to work. Collected data can be easily uploaded to any Windows PC
using a USB cable and the DC Sync upload utility.