Manual

ManualsBrandsAMMCO ManualsEquipment1475 Mobile Washer

Model 1475

Mobile Washer

READ these instructions before placing unit in

service. KEEP these and other materials delivered

with the unit in a binder near the machine for ease

of reference by supervisors and operators.

Safety Instructions

Setup Instructions

Operating Instructions

Maintenance Instructions

with Parts Identiﬁ cation

1601 J. P. Hennessy Drive, LaVergne, TN USA 37086-3565 615/641-7533 800/688/6359 www.ammcoats.com Manual Part No.: 95000178 00a

HENNESSY INDUSTRIES INC. Manufacturer of AMMCO

, COATS

®.

and BADA

Automotive Service Equipment and Tools. Revision: 05/12

Summary of content (8 pages)

PAGE 1
Model 1475 Mobile Washer Safety Instructions Setup Instructions Operating Instructions Maintenance Instructions with Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference by supervisors and operators. 1601 J. P. Hennessy Drive, LaVergne, TN USA 37086-3565 615/641-7533 800/688/6359 www.ammcoats.com HENNESSY INDUSTRIES INC. Manufacturer of AMMCO®, COATS®.
PAGE 2
Table of Contents Safety Instructions ...................................2 Owner’s Responsibility..........................................2 Safety Notices and Decals ....................................2 O.S.H.A. 29 CFR 1910, et al., Compliance.............3 IMPORTANT INFORMATION READ BEFORE OPERATING .................................3 Setup Instructions ....................................4 Receiving ...............................................................4 Specifications .........................
PAGE 3
O.S.H.A. 29 CFR 1910, et al., Compliance To the extent an individual erroneously utilizes this machine with an asbestos containing product, strict compliance with the Occupational Safety & Health (“OSHA”) Standard Regulation 29 CFR 1910, et al., is mandatory. Protective Clothing.
PAGE 4
Setup Instructions Receiving The shipment should be thoroughly inspected as soon as it is received. The signed bill of lading is acknowledgement, by the carrier, of receipt in good condition of the shipment covered by our invoice. If any of the goods called for on this bill of lading are shorted or damaged, do not accept them until the carrier makes a notation of the shorted or damaged goods on the freight bill. Do this for your own protection.
PAGE 5
3. Pull the drum off approximately one-inch and wet the brake assembly again. 4. Remove drum and rinse in basin of washer. 5. Check for wheel cylinder leakage and finish washing the assembly. 6. If after inspection the brakes do not need servicing, allow them to air dry before reinstalling the drum. Note: Never use the brush to clean brake friction material that will not be replaced nor drums or rotors that won’t be turned.
PAGE 6
Parts Identification ITEM PART NO. 1 95000173 2 95000165 3 95000168 4 95000180 5 95000172 6 95000181 7 95000184 9 95000164 10 95000185 11 95000186 12 95000167 14 NA 15 NA 16 NA 17 95000179 18 95000166 19 629696 20 95000169 21 NA 22 629700 23 95000183 24 95000182 25 95000138 26 629706 27 NA 28 95000188 29 95000189 30 95000191 31 95000192 32 95000193 33 95000190 34 NS 35 NS 36 NS 37 NS 38 NS 39 NS * 629702 * 629710 DESCRIPTION Washer Sink Washer Cover Mount BW Flange Brake Washer Base 16 Gal.
PAGE 7
Mobile Washer •7