User's Manual

2
Install SIM & microSD Cards
Power Connection
To connect the device to a power
source, connect the 2-pin terminal
block plug of the power adapter to
the 2-pin terminal block receptacle
on the device. Then connect the
adapter to a power soucre. The
device will be automatically turned on
upon power-on .
To install a SIM card to the device, locate the SIM card slot on the side and insert
the card following the direction as shown below. Push the SIM card into the card
slot until it locks into place.
To remvoe the SIM card, just push the SIM card in to eject it from its slot.