IB004 Thermal Camera User manual
Draft Version 0.1 Copyright Notice © Amobile Intelligent Corp. All Rights Reserved. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer. Disclaimer The information in this document is subject to change without prior notice in order to improve the reliability, design and function.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Manufacturers of U‐NII devices are responsible for ensuring frequency stability such that an emission is maintained within the band of operation under all conditions of normal operation. introduction of System Content 1. Thermal camera(IB004) 2.
introduction of IB004 The Part function 2 1 3 5 4 6 1 LED indicator Solid red: disconnect Blink blue: connecting Blink green: connected 2 8μm ~14 μm IR Camera 3 Power button Auto power on when power connected 4 Release the button to adjust the angle of camera.
How to fix the Camera To use the M5 screw x 4 to secure the Camera 6
Connecting and power on To connect the camera and power on 1. Hole the M8 connector of in-box adapter then pin to pin to insert the power jack if IB004 2. To secure the connector then insert the adapter to AC socket。 3.
The definition of M8 Jack The M8 jack of IB004 Pin color definition 1 Blue N.