User's Manual

4.4.2-3 Connect to Laptop with Bluetooth device
1. Switch on the power of ABG10868
2. Please refer to the User Manual of Bluetooth device to enable it connects to
the ABG10868
3. Some Bluetooth devices may need the Bluetooth password, the password is
“0000”
4. Check the number of COM port used by Bluetooth (Example COM5)
5. Open the GPS software and configure the correct COM port and baud rate:
9600bps
4.4.3 Power Jack
The power jack lets you connect either a DC car cigarette charger or AC power
charger to recharge the internal Lithium-ion battery.
Please note that the adapter rating is 5V, 1.0A, positive pole center
4.4.4 GPS Reset Button
Press this button for 3 seconds will force GPS receiver do the Cold Start.
4.4.5 Smart Power Saving Feature
The GPS circuitry of ABG10868 is turned off when the Bluetooth connection is lost.
This intelligent power saving function could help ABG10868 conserve battery
power.
4. Once the GPS receiver got
the position fix, the Satellite
Constellation map will
display the position of
Satellites. And the white
C/N bar will become to blue