User Manual

-27-
Call Hold
If your network supports this function you can dial another number
while you have a call in progress.
Method 1: (1) Dial the required number or find the required number
from telephone book and then press to make the
second call.
(2) The first call will be put on hold automatically.
Method 2: (1) Press to hold the current call.
(2) Dial the second call. When the new call is connected, the
previous one will be held automatically. These two calls
can be switched freely. Please refer to Hold/ Switch
function.
Conference Call
Conference Call is a network service. It allows up to six people to take
part simultaneously in a call.
(1) Dial the first number.
(2) Dial the second number and the first number is
held automatically after the first is connected.
(3) Press 3 + to let the first number to participate
in the conference.
(4) Repeat Step 2 and 3 to add more numbers to
participate in the conference.
(5) Press and 3 + to allow the new number to
participate in the conference, repeat the
operation to have more numbers to the
conference.
(6) Press 1 + x + to refuse one current number,
repeat the operation to refuse more numbers (x
means the number you choose to refuse ).
(7) Press to end the whole conference call.