User's Manual

3. Input the number you want to divert to and set the delay time, press

OK soft key.

4. The info is displayed to indicate if you’ve succeeded this operation

or not.

Note: You can select the transfer modes according to your need. Not

Reachable, Not Reply and Busy can be set singly or in group. However, if

you set All Calls, the other transfer setting will be invalid automatically.

Activate, cancel or check any call transfer mode, short-time display

will appear for handling the setting. Only after finishing operating can

you get the result.

When the Call Baring function is activated, some transfer function

will be invalid.

Incoming Filter

With this operation, you can put numbers into Reject number that will

never get through your phone; and put numbers into Accept number so

that only the number stored in the Accept Number list can get through

your phone.

Note: Only when you subscribe the Line Identification Service can you

activate the incoming filter.

Call Reject

The phone will automatically refuse the numbers you put in the

“Reject Number” (up to ten records); you can get the prompt

information in the standby mode when someone calls you with these