User's Manual

Table Of Contents
Using Bluetooth
127
[Y24]
To match the found device
(1) After the phone has searched for other
Bluetooth-enabled devices and lists them,
you can select your desired device name
in the list. Click <Next > and enter a
passcode (the passcode must be between
1 and 16 characters long), then click
<Next> to establish a secure connection
(2) Wait for the paired device to accept the
partnership.
(3) On your phone, a message will appear,
indicating that your phone has connected
with the paired device. Click <OK>.
(4) The name of the paired device is then
displayed. You may edit and enter a new
name for that device and the devices
which have created partnership with your
phone will be saved in “Add Devices” list.
To accept a Bluetooth partnership
(1) Ensure that Bluetooth is turned on and in
discoverable mode.
(2) Click <Yes> when prompted to establish a
partnership with the other device.
(3) Enter a passkey (the same passkey that is
entered on the device requesting the
partnership) to establish a secure
connection. The passkey must be between
1 and 16 characters long.
(4) Click <Next>.