Welcome to use MX20 USB Modem. Your user guide is designed to: First, explain simply how to use your phone, so finding the best way to enjoy your life. Then, ensure that you can get the best services offered. The product you hold can be recycled, so please contact your local dealer for the information on how to dispose of your used appliance.
Content Safety Precautions......................................................................... III 1.Get to Know Your USB Modem ................................................... 1 Your USB Modem .................................................................................1 Indicator................................................................................................1 Icon introduction ...................................................................................2 2.
Modify a contact..............................................................................17 Delete a contact ..............................................................................17 Application of contact entries ..............................................................18 Send SMS.......................................................................................18 Search for a contact entry...............................................................
Safety Precautions Please read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information will be given in this manual. You must not use the USB Modem while driving. The USB Modem may disturb the communication network of aeroplanes, so please switch off the device on board. All USB Modem may be disturbed, so as to influence its capability. Switch off your device in areas where the use of the device is prohibited.
You must not disassemble USB Modem or its accessories by yourself. Please contact the appointed maintenance personnel to repair. Please put the USB Modem and the accessories out of reach of the children and don’t let them use USB Modem without adults around. Please back up the important information stored in USB Modem to avoid losing important information. Please switch off the USB Modem when near the high–precision electronic devices; otherwise, it may cause electronic device problems.
disposal locations or return them to our company. Do not dispose of the batteries in the dustbin. 2. For body worn operation this phone has been tested and meets FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines Statement: This device complies with Part 15 of the FCC Rules.
Get to Know Your USB Modem 1. Get to Know Your USB Modem Your USB Modem Statement:the earphone slot is not used for telephone call now.It is only for preparatory funtion in the future. Indicator There are four colors of the Indicator Light: Red, Yellow, Blue and Green. The different color shows the different network service / status of USB Modem.
Get to Know Your USB Modem Red No network service or power off Yellow Activating the network service or system powering on Icon introduction Icon Description Shows the strength of the network signal, the more the number of bars, the better the signal strength. Unread message Message memory full. Please delete undesired message and you can then continue to receive and send message normally. Shows the network type is GSM or UTMS.
Installation Guide 2. Installation Guide System requirements The USB Modem can be used on the PC with the following Windows operation systems: Windows 2000 Windows XP If you want to use the USB Modem, your PC configuration should meet the following basic requirements: USB 1.
Installation Guide completed, a shortcut ICON will appear on your desktop. But at this stage the installation still has not been finished. Please wait for a few moments to find the new hardware (Icon will appear in windows tray). Once new hardware is found and the USB Modem is ready to be used. If the installation does not start automatically, please use the CD provided to install the necessary software.
Installation Guide (3) Close USIM card cover. Uninstall the Dashboard Management Program You can refer to the following instructions to uninstall the Dashboard management program: Open [Control Panel → Add or Remove Programs], and select [Telit MX20 USB Modem] finish the uninstallation as per system prompts. Click [Start → Program →Telit MX20 USB Modem →Uninstall Telit MX20 USB Modem], to run uninstallation program automatically.
Dashboard Management Interface 3. Dashboard Management Interface Enter Dashboard Management Program Select [Start → Program →Telit MX20 USB Modem →Telit MX20 USB Modem], or select the shortcut from on your desktop and double click. This opens the USB Modem Dashboard Management Program. If your SIM has a PIN (Personal Identification Number) code set, you should input the correct PIN code. Notice If you input your PIN Code incorrectly for three times in succession the SIM card will be locked.
Dashboard Management Interface Area Code Corresponding Introduction 1 Title bar: Shows the current window title. 2 Status bar: Shows the signal and all kinds of icons. 3 Function buttons: Used for choosing the function type of the current operation. 4 Function screen: It changes with the selected function.
Internet Connection 4. Internet Connection The USB Modem model MX20 allows connection to the Internet via several air interfaces including HSDPA , UMTS , EDGE and GPRS. You can establish your desired connection manner according to the network service available. The default connection manner is HSDPA Internet If network supports, you can send messages while surfing the Internet. and enter the Internet function screen.
Internet Connection Area number Introduction 1 Parameters area: Input Internet connection parameters in this area. 2 Status area: Displays the connection status. Network connection setting Create a new configuration (1) Click and enter [New Connection] screen. (2) Enter the relative parameters of Network connection. (3) Click to finish creating a new configuration. Notice Select [Set Default] and set the current network connection configuration as the default one.
Internet Connection Internet Connection & Disconnection Connect to the Internet (1) Click” Connection name” listed on the Internet function screen, and select a setting needed connection. (2) Click and dial-up to connect to the Internet. Disconnect from the Internet If you want to disconnect from the Internet, click .
SMS 5. SMS Click the function button to enter the SMS interface. New SMS (1) Click and enter [Write SMS] interface. (2) Input a phone number. You can input the phone number by the following methods: Input number directly: The USB Modem supports the function of sending SMS to several (up to 10) people at once, you can input 10 numbers at most, but you should separate them by inserting “;” between each number in the same way as for normal email.
SMS Notice: USB Modem supports the long SMS. (You can edit and send five Segments each time at most) Inbox [Inbox] stores all SMS you’ve received. Your PC can store up to 500 messages, while the number that you SIM card can store depends on the type of your SIM card. If [Inbox] is full, the USB Modem will prompt you when there is a new SMS coming and the new SMS will replace the oldest read message of [Inbox].
SMS Reply a SMS (1) Select the SMS you want to reply. (2) Click to enter [Write SMS] screen, and the sender’s number will appear in number box automatically, or you can modify the number by yourself. (3) Edit the SMS. (4) Click to send the SMS Delete a SMS (1) Select a SMS or several SMS (2) Click , if you are sure you want to delete the selected SMS, click in the dialog box to delete the SMS.
SMS Notice The SMS stored in USB Modem won’t be lost even if PC or USIM card is changed.
SMS The specific operations of message storage management show as follows: (1) In area 1 and 2, click ‘Location’ list and select a storage location from PC, USB Modem and USIM card. (2) In area 1 and 2, click ‘Type’ list to select a storage type from Inbox and Outbox. (3) Select the SMS you want to copy or remove in operation object area. (4) Select the operation manner as [Copy] or [Move] in operation manner area.
SMS Outbox [Outbox] is used to store the SMS you have sent successfully or unsuccessfully. The operations for the [Outbox] is similar to that of [Inbox], so please refer to that for details. Draft Click while editing a SMS, then the SMS will be stored in [Draft]. The operations for the SMS of [Draft] is similar to that of [Inbox], please refer to that for details.
Contacts 6. Contacts The USB Modem can store 100 contact entries; and the memory of USIM card depends on the USIM card type. You can create, modify, delete, or search for a contact entry. The USB Modem also supports import and export of contact entries, so you can send the contact entries from USB Modem to PC, in order to be convenient for management. , and enter Contacts interface.
Contacts (2) Click . (3) If you confirm to delete, click in the prompt box. Application of contact entries Send SMS You can select a contact entry and send SMS directly, and the specific operations show as follows: (1) Select a contact entry.
Contacts (3) Click and the first contact entry meeting with the condition will be highlighted. If there are many contact entries which meet with the condition, you can click or to view the previous or the next entry. The storage management of contact Import contact You can import the contact file with the appointed format from PC to USB Modem. Notice The USB Modem supports the contact file that can be imported are the files with VCF format and CSV format.
Contacts (2) Select the contact entry needing to be transferred, and your selected area is source area, while the other area is target area. (3) Press transmission manner button and activate file transfer function, so your selected contact entry will be transferred from source area to target area.
Options Settings 7. Options Settings Click in Toolbar to enter Options function screen. General setting Click [General] option and you have access to some security and power settings for USB Modem. Security setting You can set a PIN code. The PIN code is the personal identification number code supplied with your USIM card; with the PIN code, you can protect your USIM card from the unauthorized use by other people.
Options Settings before modifying. The detailed operation of modifying PIN code is as follows: (1) Click to enter [Modify PIN Code] interface. (2) After inputting old PIN code correctly, input the new PIN code twice. (for 4-8 digit bits) (3) Click and finish modifying. Disable PIN You can disable PIN code checking function if you don’t need it. The detailed operations are as follows: (1) Click to enter [Disable PIN] interface.
Options Settings Message Center: Input message center number which is used for sending text message, if you do not have this number, your Service Provider will be able to provide you with it. Preferred Storage: Select where to preferred storage from [PC], [ME] and [USIM]. Validity Period: When the recipient can’t receive the message you’ve sent, the message center will send the message again in the valid period you set.
Troubleshooting 8. Troubleshooting Please check to see if any problems you have encountered in respect to the use of your USB Modem are described in the below tables. If you are unable to resolve the problem, please contact with the authorized maintenance center. Can’t access to Internet Possible reasons Solutions Haven’t subscribed to the wireless data service Please consult with your Service Provider to get the service. Have no relative configuration of Internet services, or the configuration error.
Troubleshooting many functions of USIM card and USB Modem will be locked, please refer to “Enter Dashboard Management Program” section. 2. If you are unsure of your PIN code and/or PUK code, please contact your Service Provider. USIM card state is incorrect Possible reasons Solutions Insert the USIM card incorrectly Please inset the USIM card correctly according to the method in user manual and as shown on the USB modem.
USB Modem Maintenance 9. USB Modem Maintenance USB Modem is a high-precision electronic product, so please maintain it carefully. The following advice can help you to maintain USB Modem and prolong its life. The USB Modem and its spare parts should be put out of the reach of the children. Keep the USB Modem dry. Moisture or water will corrupt circuit board. Don’t lay USB Modem in places with dust, or it will affect the normal use of USB Modem.
Safety Information 10. Safety Information Using environment Please put USB Modem away from magnetic devices, such as magnetic cards and floppy disk. Please don’t put the USB Modem in instruments with strong electromagnetism, such as electromagnetism pot and microwave oven or it will cause circuit failure. Please don’t lay and use USB Modem in places of high temperature and flammable gas, such as fire or heater, for fear cause gas burnt, USB Modem failure, fire or explosion.
Safety Information The notice of using spare parts Please put all spare parts of USB Modem (such as USIM card,) out of the children’s reach, for fear danger occurs. Because USB Modem spare parts aren’t water-proofing, so please keep all spare parts dry. Other safety information Please obey the local laws about disposing of the USB Modem packing material and old USB Modem, and try to support recycle action.