USER MANUAL LD42VM6E LD47VM6E
Contents Safety Precautions Important Safety Instructions Accessory List 1 2 4 Overview of TV Front Panel Description 5 Back Panel Description 6 Disassemble the bottom terminal cover 8 Disassemble the side cover 9 Assemble the wall mount 10 Remote Control Overview (All Functions Except Teletext) 11 Remote Control Overview (Teletext Functions) 12 Remote Control Operation 13 Basic Operation(TV) 14-18 Menu Operation Menu Description 19 Picture Menu 20 Sound Menu 20 Channel Menu Window
Contents Remote Control Menu 32 33 Setting System Setting 34 Channel Setting 39 41 43 Channel List Favorite List Common Interface Using EPG Digital Teletext 44 45 46 Troubleshooting And Maintenance Troubleshooting 47 Maintenance 47 Display Mode Specifications(TV/DTV) 48 49
Safety Precautions This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.
Important Safety Instructions 12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, please take caution when moving the cart to avoid injury from tip-cover. 1.Read These Instructions All the safety and operating instructions should be read before the product is operated. 2.Keep These Instructions The safety and operating instructions should be retained for future reference. 3.
Important Safety Instructions 18.Overloading Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 24.Please make sure the product is near enough To the electrical outlet to make it easy of operation. 25.The product shall be connected to a mains socket outlet with a protective earthing connection. 19.
Accessory List SUB SOURCE PIP/PBP DRE GUIDE FAV INFO DTV/TV DTV Quick Start SUBTI Power Cord (×1) User’s manual CD (×1) and Quick Start(×1) TLE AUDIO TEXT TV/RA DIO "AAA" size battery (×2) Remote Control (×1) Note: Please use the power cord which includes the ground wire. This TV set shall be connected to a main socket outlet with a protective grounded AC power outlet. Where to place the TV 1 . Selecting where to place the TV 2.
Front Panel Description SOURCE MENU CH+/- VOL+/- POWER -5-
Back Panel Description Back Panel of model: LD42VM6E Picture 3 28 27 Picture 1 26 25 Picture 3 Picture 2 24 23 22 21 20 Picture 1 1 2 3 4 5 6 8 7 9 10 11 Picture 2 13 12 14 15 16 17 18 1 SERVICE ONLY(A) 15 2 OPTICAL OUT 16 3 COAXIAL OUT 17 SERVICE ONLY(D) 4 HDMI 1 IN 18 COMMON INTERFACE 5 HDMI 2 IN 19 POWER 6 COMPONENT IN 20 POWER SWITCH 7 COMPONENT AUDIO IN 21 HDMI 3 IN 8 AV CVBS OUT 22 HDMI 4 IN 9 AV AUDIO OUT 23 HEADPHONE 10 VGA AUDIO IN 24
Back Panel Description Back Panel of model: LD47VM6E Picture 2 28 27 26 25 24 23 Picture 2 Picture 1 22 21 20 6 7 8 9 10 11 12 3 2 1 Picture 1 13 14 15 17 16 4 18 19 1 EXT 1 15 VGA AUDIO IN 2 EXT 2 16 VGA IN 3 ANALOG ANTENNA IN 17 DIGITAL ANTENNA IN 4 COMMON INTERFACE 18 DIGITAL ANTENNA OUT 5 POWER 19 SERVICE ONLY(D) 6 SERVICE ONLY(A) 20 POWER SWITCH 7 OPTICAL OUT 21 HDMI 3 IN 8 COAXIAL OUT 22 HDMI 4 IN HDMI 1 IN 23 HEADPHONE HDMI 2 IN 24 S-VIDEO
Disassemble the bottom terminal cover To disassemble the bottom terminal cover, do as follows: ① ② 1. Slide the two slip hooks to unlock position in the direction of the arrowheads. 2. Pull down the terminal cover in the direction of the arrow until the top middle buckle disconnects. ③ 3. Remove the terminal cover horizontally.
Disassemble the side cover Follow the steps given below to disassemble the side cover: ① 1: Press down the two snap hooks to unhook them. See ①. 2: Hold on to step 1 and then lift up the side cover in the direction of the arrowheads marked with ②. ② 3: Take off the side cover. See picture 2 for the rear view without the side cover off.
Assemble the wall mount Only those wall mounts whose bearing capacity exceeds 150KG with a hole distance of 400(H)*200(V) and with not less than 4 M6 holes are applicable to this LCD TV. Before getting started with the wall mount, you need to firstly disassemble the stand by following the steps below. ① ② 1. Uninstall the bottom terminal cover. 2. Place the machine face down on a flat table with soft cushion. 3. Disconnect all connectors from the machine. 4.
Remote Control Overview (All Functions Except Teletext) Power button Sub source Last source SUB SOURCE Main source Mute To freeze current image Aspect Video on/off PIP/PBP PIP/PBP DRE GUIDE FAV INFO DTV/TV Display status To set sleep time Switch DTV/TV mode Enable DRE Channel list Stereo / Mono sound selection Numerical buttons Last channel Digital TV menu DTV Volume up/down Next/previous channel Enter OSD setup mode Page up and down Fast forward/Fast back Direction bottons Enter Stop
Remote Control Overview (Teletext Functions) SUB SOURCE PIP/PBP DRE GUIDE FAV INFO DTV/TV DTV Teletext PageUp Teletext Index Teletext PageDown Teletext SubPage Up Teletext SubPage Down Teletext SubPage Teletext Size Teletext Display/Mix Teletext Reveal Colour Buttons Teletext Hold SUB T IT L E AUDIO TE XT T V /R -12- A D IO
Remote Control Operation Remote control direction Batteries Installation Point the remote control at the remote control sensor. Pull the battery cover downward in the direction shown by the arrow and remove it. 2 1 30 30 Insert the batteries with correct polarities. SUB SOURCE PIP/PBP DRE GUIDE FAV INFO DTV/TV DTV SUBT ITLE AUDIO TEXT TV/RA DIO Replace the battery rear cover. Make sure there are no objects between the remote control and its sensor.
Basic Operation Power on / Power off 1. Plug the power cable into the power socket. Make sure the output voltage and frequency of the power is consistent with this machine. 2. Turn on the main power switch on left side of the TV, then the red light on the front will glow, and the TV comes into standby mode. Press "POWER" button on remote control , or the "POWER" button on the right side of the TV , the TV will be turned on, and the indicator turns green. 3.
Button Instruction d Setting sound system Press " " buttons to select the appropriate sound system . For example, for U.K select "I". T hen press "OK" button to confirm the setting and press "Next" button to go to next menu, or press "Back" button to go back to previous menu. Sound System B/G I D/K L L’ Cancel e Channel Preset Press "Yes" button to start the auto search. Press "Back" button for go back to previous menu. Press "No" button to quit. The auto search will take a few minutes.
Button Instruction Channel Shift ● In TV mode, press "CH+" button to select next channel, and press "CH-" button to select previous channel. ● Press this button to switch between current and last channel. Direct Select ● To select a one-digit channel: Press from 0-9 to directly input your desired channel number. ● To select a two-digit channel: Press from 1-9 to input the first digit and from 0-9 to input the second digit.
Button Instruction DRE DRE ● Press " DRE " button to enter the DRE setting menu as follows. DRE Off Freeze Image FREEZE ● Press "FREEZE" button to freeze the current image . P ress it again to exit the freeze mode. Note: This function is invalid in PIP/PBP mode. Sleep Timer Set Up SLEEP ● Press "SLEEP" button to set the sleeping clock as follows. ● Press "SLEEP" button to set the sleep time. Sleep Timer PIP/PBP PIP/PBP ● Press "PIP/PBP" button to display PIP or PBP mode.
Button Instruction Browse The Channel List LIST ● Press "LIST" button to display Channel list. ● Use direction buttons to select specific channel. Use " " and " " buttons to switch the listing pages. Press the "EXIT" button to quit. ● Press "OK" button to browse the channels you Channel List 0 5 ------ 1 C01 6 ------ 2 ------ 7 ------ 3 ------ 8 ------ 4 ------ 9 ------ ------ have selected.
Menu Operation Menu Description If you want to adjust the display settings, please follow the instruction below. Press the "MENU" button to browse the Picture Menu, Sound Menu, Channel Menu, Window Menu, Setting Menu, DRE Menu in turn. Press "EXIT" to exit.
Menu Operation Picture Menu 1 2 3 4 You can adjust the Picture to get your desired picture effect. Press the "MENU" button to enter Picture menu. Press " " buttons to select "Picture Mode". Picture Sound Channel Window Press " " buttons to pop out the small window Picture Mode as below. (PictureA) Brightness 50 Press " " buttons to adjust the "Picture mode".
Menu Operation Channel Menu Sound System 1 2 3 4 Press "MENU" button to select "Channel " menu. Press " " buttons to select " Sound System'' . Press " " buttons and choose the suitable system for local TV signal. Press ''EXIT'' button to exit.
Menu Operation Exchange Channel If you'd like to exchange the current channel with another channel, please refer to "Exchange Channel ". 1 Press "MENU" button to select "Channel" menu. 2 Press " 3 Press " 4 Input the Channel Exchange number (the maximum number is 99), then press " OK " button to save your setting. Then the two channel are exchanged. Press "EXIT" button to exit "Channel Exchange" mode. " buttons to select " Exchange Channel " . Picture " button to enter this menu.
Menu Operation Manual Search You can also set program list again one by one by "Manual Search" function. 1 Press " MENU " button to select "Channel" menu . 2 Press " " buttons to select "Manual Search". Picture Sound Channel Window Current Channel Skip Channel Rename Channel Exchange Channel Auto Search Manual Search 3 4 5 Press " " button to enter "Manual Search". Press " / " buttons to search channels. When a channel is found, the searching process will stop.
Menu Operation Window Menu Aspect You can adjust the aspect to meet your requirement. Press "MENU" button to select "Window" menu. Press " " buttons to select " Aspect ratio " . Press " " buttons to change the setting. Picture Sound Window Channel Aspect ratio PIP Position Note: you can aslo set the image mode via " Aspect " button on the remote control ,please rrefer to page 16.
Menu Operation Setting Menu OSD Language Press "MENU" button to select "Setting" menu. Press " " buttons to select '' OSD Language ''. Press " " buttons to change the setting. Picture Sound Channel Window English OSD Background Opaque Center OSD Position Teletext Language Sound Source DRE Setting OSD Language Western Europe Main Window CVBS EXT2 OSD Background 1 Press "MENU" button to select "Setting" menu. 2 Press " 3 Press " " buttons to select "OSD Background".
Menu Operation Sound Source Press "MENU" button to select "Setting" menu. Press " " buttons to select ''Sound Source''. Press " " buttons to change the setting. Picture Sound Channel Window Setting OSD Language English OSD Background Opaque OSD Position Teletext Language Sound Source DRE Center Western Europe Main Window CVBS EXT2 EXT2 In this function, you can choose the internal source of EXT2. Press "MENU" button to select "Setting" menu. Press " " buttons to select "EXT2”.
Menu Operation Colour Temperature 1 Press "MENU" button to select "Setting" menu. 2 Press " 3 " buttons to select "C olour Temperature " . Press " " buttons to change the setting. Picture Sound Window Channel Sound Source EXT2 Blue Screen Sleep Timer Colour Temperature Backlight Setting DRE Western Europe Main Window CVBS On In "User " mode , you can adjust "Red/Green/Blue". Press " " buttons to select "Red/Green/Blue". Press " " buttons to change the setting.
Menu Operation DRE Menu DRE 1 Press "MENU" button to select "DRE" menu. 2 Press " " buttons to select " DRE''. 3 Press " " buttons to change the setting. Picture Sound Channel Window Setting DRE Optimize DRE MEMC Demo DEMC Demo 1 Press "MENU" button to select "DRE " menu. 2 Press " 3 Press " " button to enter "MEMC Demo" mode. Press "EXIT" button to quit. 4 " buttons to select " MEMC Demo" .
PIP PIP means picture in picture. TV set can display a sub window on the screen, which displays another program. PIP Press ''PIP/PBP'' button once to display the following picture. Sub window Main window Select Sub Source Press ''SUB SOURCE'' button to display the ''Sub Source'' Menu. Use the direction button to select sub source from the two options, then press ''OK'' button to confirm. Or use the numerical button to select the corresponding source .
Teletext Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language (cable networks, satellite channels, etc.). Teletext Language Selection. The default Teletext Language is Western Europe. If the Teletext language is not Western Europe in your region, please kindly change the language according to the instruction in Page25.
Preparation DTV Antenna(Aerial) Connection For viewing both analog and digital broadcasts. 75 ohm Round Cable (not supplied) For viewing only digital broadcasts, you do not need to connect the antenna cable (supplied). Switching On 1. Turn on your TV Set. Welcome 2 . Select the "DTV" input in the Source Menu or press the "DTV" button at any time to display the digital terrestrial television program. It needs a few seconds to startup.
Remote Control DTV 1.DTV/TV: Press this button to shift DTV/TV mode. 2.INFO: Press this button to show the information banner. 3. GUIDE: Press this button to display the electronic programmer SUB SOURCE guide (EPG) menu. PIP/PBP DRE 4. FAV: DTV/TV 1 4 2 3 INFO GUIDE 5 FAV Press this button to enter FAV menu, if there is no DTV menu on the screen. Press this button continuously to choose different programs, 6 7 such as News, Movie, MTV, Finance, etc. 5.
Menu DTV You can change the setting of menu such as System setting, Channel setting, Channel List, Favorite List, Common Interface, as you desired. Press "DTV MENU" in the remote control to display DTV menu. Press it continuously to switch menus. For the detailed operation, please refer to System Setting, Channel Setting, Channel List, Favorite List, Common Interface stated below.
System Setting DTV Time Setting In System Setting menu, press " / " to choose Time Setting, and then press " " to enter next menu. System Setting Time Setting Time Zone Banner Time Setting Time Zone Setting In Time Setting menu, choose "Time Zone " , and then press " / " to change Time Zone setting. You can set time zone according to the time zone you belong to. Press " " to enter option menu. (Picture a-1-1) Press " / " to choose time zone. Press "DTV MENU" to return. Press "EXIT" to exit.
System Setting DTV Language Setting In System Setting menu, press " menu to continue setting. / " to choose Language Setting, and then press " " to enter next System Setting Language Setting Menu Audio Subtitle Teletext Menu In Language Setting submenu, press " / " to choose one language to be the language of menu. Press " " to enter option menu.(Picture a-2-1) Press " / " to choose the language of menu you need. Press "DTV MENU" to return. Press "EXIT” to exit.
System Setting DTV Subtitle In Language Setting submenu, press " / " to choose one language to be the language of subtitle . Press " " to enter option menu.(Picture a-2-3) Press " / " to choose the language of subtitle you need. Press "DTV MENU" to return. Press "EXIT" to exit. Menu English Audio English Subtitle English Teletext English Picture a-2-3 Teletext In Language Setting submenu, press " / " to choose one language to be the language of teletext. Press " " to enter option menu.
System Setting DTV Parental Setting Change Pin Code Choose "Change Pin Code", you can change password. (Picture a-3-3) Press number "0-9" to input current password, and then press " " to enter next item. Press number "0-9" to input new password, press " " to enter next item and input new password again. The password is successfully reset, if two new password input are exactly the same. Otherwise, you need to re-input new password. Press "OK" to confirm. Press "EXIT " to exit.
System Setting DTV Restore Default Choose "Restore Default", you can clear all the channels.( Picture a-4-1) Press " " to activate "Restore Default" box. (Picture a-4-1) Press "OK" to confirm restoring default. Press "DTV MENU" to return. Press "EXIT" to exit. Restore Default Are you sure? OK Confirm Return Picture a-4-1 Through this item, you can delete all the user's setting and restore default. Notice: The programs of Channel List will be deleted, and the DTV will startup automatically.
Channel Setting DTV Channel Search In Channel Setting menu, press " / (Picture b-1-1) " to choose Channel Search, and press " " to enter next menu. Channel Setting Channel Search In "Channel Search" menu, you can set Search Type, Channel NO., Save Encrypted, Update Mode and so on. The password input box will be displayed on the screen. (Picture b-1-1) Press " " to enter option menu.( Picture b-1-2) Press " / " to choose items to set. Press "DTV MENU" to return. Press "EXIT" to exit.
Channel Setting DTV Sort Channel In Channel Setting menu, press " / " to choose Sort Channel, and press " " to enter next menu. Channel Setting Sort Channel In "Sort Channel" menu, you can sort ascending or descending the saved programs according to the name. Descending sort is to sort programs by initials of their names alphabetically from Z to A. Ascending sort is to sort programs by initials of their names alphabetically from A to Z. Press " / " to choose Name Up/Name Down/Default.
Channel List DTV Channel List Channel List Channel List In main menu, press " item. " to enter picture c-1-1 as below. You can manage your program list through this Press " / " buttons to choose the channel. Press " " button to enter. (Picture c-1-2) Press "TV/RADIO" to choose the program list of TV and RADIO. When choose the desired program, press "OK" button to play. Press "EXIT " to exit Channel List. Channel List TV 1.
Channel List DTV Booking List In Channel List menu, press " / ( Picture a-5-1) " to choose Booking List, and then press " " to enter next menu. Channel List Booking List You can arrange programs scheduled to play in several days. Press "EXIT " to exit. Press " / " key to choose the item to set. Press " / " key to set the item. Booking List ID No Items 1 Start Time 2000.0.0 0:00 Duration 0 Type Playback Returen Move Picture c-2-1 Press " / " to choose items to set.
Favorite List DTV Favorite List This menu setting is convenient for you to manage your favorite channels. It can display names of channels, and can be sorted as you like.(Picture d-1-1) Press "FAV" to switch circularly News, Movie, MTV, Finance, Other. Press " " to enter option menu. (Picture d-1-2) Press "EXIT " to exit. Favorites List Fav Group: News Teachers’ TV Toonami Move Popup Menu Next Picture d-1-1 Press " / " to choose Add or Delete. Press "OK" to confirm your choice.
Common Interface DTV Common Interface A single DVB Common Interface (CI) will be implemented to allow adoption of a Conditional Access (CA) system by means of a plug-in CA module. Scrambled Broadcasting service can be routed via the CA system. If the CA system on the CI module requires a smart- card reader, this reader shall be part of the CI module.
Using EPG DTV The EPG screen displays a list of the stored channels along with information on what programmes are being broadcast. You may press "GUIDE" button on the remote control to enter EPG mode, and then press "GOLD" button to enter full screen EPG mode. This item displays current and next program for every channel EPG submenu displays information of playing programs in saved channels. 1. Press " / " to browse the coming programme in different hours of current channel. 2.
Digital Teletext 1.Press the TEXT button to activate the Teletext mode. Press again to view the TV program with teletext page. You can return to normal viewing by press the TEXT button for the third time. 2.The red, green, yellow, blue buttons in the bottom of Teletext interface are guide buttons. Press "OK" button to pick function menu, for example: 3.When function button is emerged, if press red button to lock this page, it will not be renewed. Press red button again to return to normal state. 4.
Troubleshooting And Maintenance Troubleshooting Please read this user's manual before using the TV set. If you have any troubles in using this TV set, try to solve it by the suggestions mentioned below. If you can not remove the trouble after adopting corresponding suggestions, please contact the A moi service center or dealer authorized by us. For your own safety, please do not open the cover and repair it by yourself, or it may cause further damage, electric shock or fire.
Display Mode Both screen position and size will vary depending on the type of VGA monitor and its resolution. The table below shows all of the display modes that are supported: VGA: Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) 640X480 31.5 60 640X480 37.9 72 640X480 37 . 5 75 640X480 43 . 3 85 800X600 35.1 56 800X600 37.9 60 800X600 46.9 75 1024X768 48.4 60 1024X768 56.5 70 1024X768 60.0 75 1152X864 67.5 75 1280X960 60 . 0 60 1280X1024 64 .
Specifications TV LD42VM6E MODEL Power Supply LD47VM6E Input: AC 100-240V 50Hz/60Hz Input: AC 100-240V 50Hz/60Hz Standby: < 1W Standby: < 1W 250W 300W Audio System BG/DK/I /L/L’ BG/DK/I /L/L’ TV System PAL, SECAM, NTSC PAL, SECAM, NTSC Sync: H/V Separate, TTL, P. or N. Sync: H/V Separate, TTL, P. or N. Video Signal: 0.7Vp-p, 75ohm Video Signal: 0.7Vp-p, 75ohm Audio in: RCA JACK (L&R), 0.5Vrms (-9dB) Audio in: RCA JACK (L&R), 0.
This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product. AMOI ELECTRONICS CO., LTD. 45 TIYU RD, XIAMEN, FUJIAN 361012, CHINA Http: // www.amoi.