ATOZ ID card Tracker Quick Start Guide Model : SB52-SW Version 1.
Appearance LED Indicator Button (Smooth) Name Tag Micro-USB 5-pin connector Button (Textured) Reset hole Features Understanding the movement of employees will improve workplace efficiency and address potential work hazards • Appropriate for tracking people and management to increase efficiency and security in workplace • Immediate notification of predefined events and panic situation in the workplace • Helps understand the movement and attendance of staff
Turning the power on Press and hold both buttons together until the LED light flashes followed by an alert sound and vibration. Accessing digital door lock Access secured areas by tagging the device to the RFID reader of the door. Charging the battery When battery level is low, blue and red LED flash for 5 seconds in a 30 minute interval. (1) Plug the small end of the USB charging cable into the micro-B USB connector on your device.
Activating Emergency Mode Press and hold down both buttons for 3 seconds.§ (1) Message transmission Message will be sent 10 seconds after the alert sound, LED flashing and vibration. (2) To cancel message transmission Press and hold both buttons again within 3 seconds. § (3) Mute siren Press and hold textured button for 3 seconds. § (in case speaker mode “on” is set as default) § Trigger time is 3 secs as default and configurable.
Safety Instruction IMPORTANT: Please read and comply with all of the instructions provided in this manual before using the device. Failure to comply with the instructions given in this manual and/or using the device in ways other than the ones mentioned in this manual may result in serious injury and/or damage the product. -DO NOT use while it is charging. -DO NOT drop, knock, or shake the device. -DO NOT sit on the device -DO NOT expose to high-temperature environments or chemicals.
Device Specifications Model Number MCU Connectivity Positioning RFID User Interface Sensors Mechanical Casing Battery Accessories Dimensions SB52-SW 32-bit Arm® based Cortex®-M0, 256KB + 1024Kb Flash Sigfox RC 2 Uplink Class0u (>20dBm EIRP) / Bluetooth LE 5.0, NFC Sigfox geolocation, Indoor WiFi positioning 13.