Quick Start Guide

Press and hold down both buttons for 3 seconds.
§
(1) Message transmission
Message will be sent 10 seconds after the alert sound,
LED flashing and vibration.
(2) To cancel message transmission
Press and hold both buttons again within 3 seconds.
§
(3) Mute siren
Press and hold textured button for 3 seconds.
§
(in case speaker mode “on” is set as default)
§ Trigger time is 3 secs as default and configurable.
Activating Emergency Mode
Turning the Bluetooth function on/off
Press and hold the smooth button for BLE role mode.
§§
BLE role mode is used by engineers for firmware
updating.
§§ The BLE on/off switch time is 10 secs as default.
Press and hold the reset button with a paperclip
when (1) device is unresponsive when both buttons
are pressed; or (2) BLE Mode does not turn on.
Reset Hole
Resetting and rebooting the device
Note : When the device is in Bluetooth mode, the emergency
mode does not work.