Installation Manual

www.amp-research.com
7/11
IM2770 rev 06.08.10
AMP RESEARCH POWER STEP – DODGE RAM
15
13 14
12
Attach 11” cable ties loosely around
harness.
Attach wire harness to the control box.
Slide controller through cable ties. Line up
cable ties with grooves in controller and
tighten.
15
7
8
Remove fuse from Power Step wire harness.
+
7
7
14
14
Route long leg of wire harness to passenger side across fire wall. Secure with tie wraps.
7
_
+
GROUND
Attach power leads, red lead to positive
battery terminal and the black lead to body
ground as shown.
8
Note: Make sure controller con-
nector locking tabs fully engage.