Installation Manual

ManualsBrandsAMP Research ManualsAutomotiveAMP Research 75141-01A Power Step for Ford F-150 2009-2013

www.amp-research.com

1/9

IM2996 rev 06.08.10

INSTALLATION GUIDE

APPLICATION LENGTH MODEL YR PART #

Ford F150 SuperCab 72”’ 2009 - up 75141-01A

Ford F150 SuperCrew 79” 2009 - up 75141-01A

Designed and manufactured by AMP Research

. Patent Number 6,830,257; 6,641,158; 6,834,875; 6,938,909; 6,942,233; 7,007,961; 7,055,839; 7,163,221;

5-year limited warranty. Professional installation is recommended.

TOOLS REQUIRED

q Safety goggles

q 8 mm socket

q 10 mm socket

q 13 mm socket

q 13 mm end wrench

q Ratchet wrench and extension

q Wire stripper

q 3/16” hex key wrench ( allen wrench)

q 4mm hex key wrench ( allen wrench)

q Electrical tape

q Weather proof caulking ( silicone

sealer )

INSTALLATION TIME

2 3

SKILL LEVEL

4= Experienced

3:00

hrs

AMP RESEARCH TECH SUPPORT 1-888-983-2204 (Press 2)

Monday - Friday, 6:00 AM - 5:00 PM PST

Summary of content (9 pages)

PAGE 1
INSTALLATION GUIDE APPLICATION Ford F150 SuperCab Ford F150 SuperCrew LENGTH MODEL YR PART # 72”’ 79” 2009 - up 2009 - up 75141-01A 75141-01A INSTALLATION TIME 3:00 hrs SKILL LEVEL 1 2 3 4 4= Experienced TOOLS REQUIRED q Safety goggles q 8 mm socket q 10 mm socket q 13 mm socket q 13 mm end wrench q Ratchet wrench and extension q Wire stripper q 3/16” hex key wrench ( allen wrench) q 4mm hex key wrench ( allen wrench) q Electrical tape q Weather proof caulking ( silicone sealer ) AMP RESEAR
PAGE 2
AMP RESEARCH POWER STEP – FORD F150 INSTALLATION GUIDE Attaching motor to linkage assembly The motors must be attached to the linkage assemblies before continuing the installation process. EXPLODED VIEW 19-03129-11 Motor 19-03179-90 Socket cap screw 19-03133-90 Washer CAUTION: HANDLE WITH CARE. To insure our customers receive all components with full integrity, we pack the motors separate from their linkage assemblies.
PAGE 3
AMP RESEARCH POWER STEP – FORD F150 A Note: Some Applications require modification. Application Super Crew Super Cab Cut Length 79” (No Modification Required) 72” (Trim 7”) Cut dimension E C D 1 B x2 20-03314-XX Running board assembly 3 2 x2 10-03006-11 Motor linkage assembly x2 10-03007-11 Idler linkage assembly 4 19-03694-90 Wire harness www.amp-research.
PAGE 4
AMP RESEARCH POWER STEP – FORD F150 PARTS LIST AND HARDWARE IDENTIFICATION 7 x8 19-02487-90 Hex bolt 11 x8 19-02488-90 U-nut 8 x8 9 12 13 x16 16-03014-90 Washer Black 15 14 x25 19-02805-90 Cable Ties 7” www.amp-research.com x8 19-02802-90 Socket cap screw 19-02849-90 Hex Bolt 19-03699-90 Grommet x2 19-03339-90 Cable Ties 11” 4/9 IM2996 rev 06.08.
PAGE 5
AMP RESEARCH POWER STEP – FORD F150 Locate mounting points; first and last set of holes on the inner sill. Motor Linkage mounts toward the rear of the truck, with the exception of the passenger side on SuperCab trucks. Mount the motor linkage in front on the passenger side of SuperCab trucks. FRO NT MOTOR ASSEMBLY IDLER ASSEMBLY 1 Mount idler assembly and motor assembly. Note: Filing of sheet metal edge may be required if the sheet metal holes are misaligned.
PAGE 6
AMP RESEARCH POWER STEP – FORD F150 Route longer wire harness leg across firewall through plastic cowling to driver side. Connect red and black power leads to battery. Red lead goes to positive. Route shorter leg of harness down passenger-side wheel well. 6 7 Route longer leg of harness down along driverside wheel well and along frame of vehicle. Secure with tie wraps. Remove passenger side front kick panel and door sill plate. Roll back carpet to access hole for grommet installation.
PAGE 7
AAMMPP RREESSEEAARRCCHH PPOOW WEERR SSTTEEPP –– FFOORRDD FF115500 Posi-Tap instrutions Locate this connector and unplug for improved access during wire connection Insert Tighten Insert and Tighten Strip 3/8” 13 12 Using supplied Posi-Tap connectors, connect Power Step trigger wires to like colored wires in factory wire harness as shown in step 15.
PAGE 8
AMP RESEARCH POWER STEP – FORD F150 Attach step, sliding the mounting T-nut into position. 2 1 9 2 1 Torque 10 ft-lbs. (13.5 Nm) 9 18 19 Open doors to test. 20 1 www.amp-research.com 8/9 IM2996 rev 06.08.
PAGE 9
Congratulations on the purchase of your AMP Research Power Step Here’s what you should know... OPERATION The AMP Research Power Step automatically deploys when at least one door opens and automatically retracts under your vehicle when both front and rear doors close. If resistance or blockage is encountered while the Power Step is in motion, the drive system is designed to automatically stop. To reset, simply open or close the vehicle door and the Power Step will resume normal operation.