Owners manual

ManualsBrandsAMP ManualsAutomotiveResearch 75317-01A BedStep Fits 16-18 Tacoma

w w w . am p- research. com IM7 5 3 1 7 rev 0 2 . 0 3 . 1 7

1 / 2

Bumper Mount with Tow Hitch

Toyota Tacoma 2 01 6 -2 01 7

Torq ue wrench

1 7 mm

3/ 1 6 ”

1 7 mm

1 5 mm

Bumper mount without Tow Hitch

1 7 mm

2 3

Hand tighten Bolts

AMP PART # 7 5 3 1 7 - 0 1 A

APPLICATION

1 3mm

Assembly needs to be configured

as shown below:

Hand tighten Bolts

1 5 mm

1 2

3 4

TECH SUPPORT 1 - 8 8 8 - 9 8 3 - 2 2 0 4 ( Press 2 )

Monday - F riday, 6 :00 AM - 5 :00 PM PST

Designed and manufactured by AMP Research. Patent 6 ,8 30,2 5 7 / 6 ,6 4 1 ,1 5 8 / 6 ,8 34 ,8 7 5 / 6 ,9 38 ,9 09 / 6 ,9 4 2 ,2 33 / 7 ,007 ,9 6 1 / 7 ,05 5 ,8 39 / 7 ,1 6 3,2 2 1

Other US and worldwide patents pending. Three-year limited warranty. “ BEDSTEP” is a trademark of AMP Research.

Summary of content (3 pages)

PAGE 1
AMP PART # 7 5 3 1 7 -0 1 A APPLICATION Toyota Tacoma 2 1 3 2 01 6 -2 01 7 4 Torq ue wrench 5 6 8 7 9 1 3mm 1 5 mm 1 7 mm Hand tighten Bolts 3/ 1 6 ” Assembly needs to be configured as shown below: 8 9 1 3mm 1 2 Hand tighten Bolts 1 5 mm 1 7 mm Bumper mount without Tow Hitch 5 3 4 Bumper Mount with Tow Hitch TECH SUPPORT 1 - 8 8 8 - 9 8 3 - 2 2 0 4 ( Press 2 ) Monday - F riday, 6 :00 AM - 5 :00 PM PST Designed and manufactured by AMP Research.
PAGE 2
5 6 6 ft- lb s / 8 Nm . Reuse factory hardw are 3/ 1 6 ” 2 2 Nm ( 1 6 ft-lbs) . 9 0 Nm ( 6 6 ft-lbs) 1 7 mm 1 5 mm 4 4 Nm ( 33 ft-lbs) NOTE: Ov ertightening m ay dam age step pad 7 8 1 3mm 9 1 0 w w w . am p- research. com 2 /2 IM7 5 3 1 7 rev 0 2 . 0 3 .
PAGE 3
Congratulations on the purchase of your AMP RESEARCH BedStep® Here’s what you should know... OPERATION  The AMP Research BedStep is foot operated and deploys and retracts with a nudge of your foot.  To deploy, press down using your left foot, on the forward outside corner of the step pad.  To retract, gently kick the underside of the step pad.  Max Load Capacity: 300lbs. ®  Always use appropriate hand holds when stepping up to or down from your truck’s cargo bed.