Owners manual

www.amp-research.com

10/13

IM77238 rev 02.07.18

AMP RESEARCH POWERSTEP

– Ram Crew Cab

Using supplied butt connectors, connect the lamp wires. Red to Red, Black to Black. Once Crimped use

heat gun to shrink tube. Close and wrap conduit with electrical tape. Secure all loose wires with cable ties.

Pull lamp wires upward to avoid any wire snagging.

Afx LED light bracket assembly to rail. Mount front

light rearward of front linkage and mount rear light

just forward of rear linkage.

Afx LED lamp (20) to LED Bracket (22) as shown.

Connect harness to motor. Secure harness with tie

wraps.

Route the two Wire Harness legs down over the

wheel wells toward Motor Linkages, long leg

across to the passenger side. Secure harness with

tie wraps.